blastem.git - Oxore's fork of "blastem" emulator for ROM hacking (C)

Age	Commit message (Collapse)	Author
2014-10-14	Add equates for address references below address_off	Michael Pavone

2014-10-14	Ignore odd addresses in calls to defer in disassembler	Michael Pavone

2014-10-14	Add support for 68020 addressing modes in decoder and disassembler	Michael Pavone

2014-10-12	Tiny bit of work towards supporting 68020 addressing modes in ↵	Michael Pavone
	decoder/disassembler
2014-10-12	Add support for 68020 bitfield instructions	Michael Pavone

2014-10-12	Fix logic for automatic label generation.	Michael Pavone

2014-10-11	Better support for labels sourced from VOS program module header	Michael Pavone

2014-10-11	Fix translation of 68K address to buffer location when address_off != 0	Michael Pavone

2014-10-11	Add -r option to indicate VOS program module contains a 68K reset vector	Michael Pavone

2014-10-11	Add support for disassembling VOS program modules	Michael Pavone

2014-10-08	Improve support for disassembling 68010+ binaries	Michael Pavone

2014-08-14	Small fix to display of DMA source address in vr debug command	Michael Pavone

2014-06-21	Fix Z80 interrupts	Michael Pavone

2014-06-20	Added some preliminary support for interpreting Z80 code from non-RAM addresses	Michael Pavone

2014-06-19	Properly handle Z80 breakpoints on self-modifying code and setting Z80 ↵	Michael Pavone
	breakpoints before the Z80 program has been loaded
2014-06-19	Slight cleanup of vint handling on the Z80	Michael Pavone

2014-06-18	Remove debug printf that escaped into my previous commit	Michael Pavone

2014-06-18	Fix most of the breakage caused by the vcounter/hcounter changes	Michael Pavone

2014-06-17	Partially working switch to having a vcounter and hslot counter in the ↵	Michael Pavone
	context rather than trying to derive them from the cycle count. This should allow for more accurate handling of mid screen mode switches. Interrupt timing is broken currently though
2014-06-16	Fix a few values reported by the vr debugger command. Add DMA registers to ↵	Michael Pavone
	vr debugger command. Fix horizontal interrupt bug. Slightly more accurate (but still broken) handling of switches between H32 and H40 modes.
2014-02-13	Added CHANGELOG	Mike Pavone

2014-02-13	Update README	Mike Pavone

2014-02-13	Better emulation of the YM-2612 busy flag	Mike Pavone

2014-02-13	Properly sync hardware when frame end is reached during DMA	Mike Pavone

2014-02-12	Added tag v0.1.0 for changeset 949c7d875693	Mike Pavone

2014-02-12	Comment out LFO debug printf	Mike Pavone

2014-02-12	Update version number	Mike Pavone

2014-02-12	Implement memory writes in GDB remote debugging stub	Mike Pavone

2014-02-12	Remove defines from blastem.c that had been moved to blastem.h	Mike Pavone

2014-02-12	Add file that was accidentally omitted from a previous commit	Mike Pavone

2014-02-12	Fix operator 1 self-feedback	Michael Pavone

2014-02-11	Support setting registers in gdb remote debugger	Mike Pavone

2014-02-11	Support single stepping in gdb remote debugger	Mike Pavone

2014-02-11	Move debugging code outside of main source file	Mike Pavone

2014-02-11	Merge	Michael Pavone

2014-02-11	Adjust PSG and YM-2612 volume to be closer to the real console	Michael Pavone

2014-02-11	Fix overflow handling on FM channel output	Michael Pavone

2014-02-11	Fix check of fwrite return value in wave_finalize so that the data subchunk ↵	Michael Pavone
	size gets written
2014-02-09	Added step and step-over debugger commands. step-over is like next except it ↵	Mike Pavone
	doesn't follow conditional branches to lower addresses. This makes it useful for advancing to the end of a loop. Also fixed a bug in next introduced by the refactor.
2014-02-09	Refactor debugger next command	Mike Pavone

2014-02-09	Properly handle dbcc, rtr and rte in the debugger next command	Mike Pavone

2014-02-09	Properly handle jmp instructions in the debugger next command	Mike Pavone

2014-02-08	Initial GDB remote debugging support. Lacks some features, but breakpoints ↵	Mike Pavone
	and basic inspection of registers and memory work.
2014-02-07	Implement per-channel wave logging and primitive looping support in vgm player.	Michael Pavone

2014-02-07	Properly clamp envelope value to zero when it overflows during the attack ↵	Michael Pavone
	phase. This fixes a number of instruments that sounded rather wrong as well as the missing melody line from Mushroom Hill Zone in Sonic and Knuckles
2014-02-07	Increment sample pointer after reading a sample in VGM player	Michael Pavone

2014-02-06	Add support for VGM 1.50 PCM data blocks	Michael Pavone

2014-02-06	Add a zp command to the 68K debugger to allow printing Z80 registers while ↵	Michael Pavone
	in the 68K debugger
2014-02-06	Fix accidental use of the conditional jump instruction jp instead of jmp	Michael Pavone

2014-02-03	Initial attempt at emulating extended bank area access delays when 68K bus ↵	Michael Pavone
	is busy with VDP stuff. Also emulate the extra delay on the second access of a word-wide read to the bank area. Needs work as it seems to break stuff.