Создаю новый репозиторий. Программа для версии NixieClock_v2. Работает, часы тикают. Есть проблема, что скачет вторая сеносрная кнопка (она в другом канале). Поэтому на нее собираюсь сделать антидребезг.

1 files changed, 184 insertions, 0 deletions

diff --git a/Libraries/LED_Driver/led_driver_config.c b/Libraries/LED_Driver/led_driver_config.c
new file mode 100644
index 0000000..d2df9d4
--- /dev/null
+++ b/Libraries/LED_Driver/led_driver_config.c
@@ -0,0 +1,184 @@
+#include "led_driver_config.h"
+
+static void LED_TIMConfig ( void );
+static void LED_SPIConfig ( void );
+
+// ----------------------------------------------------------------------------
+// ���������� ������, ���������� � �� ��� ������ � RGB ��������������
+// ----------------------------------------------------------------------------
+void LED_Driver_Config ( void )
+{
+  LED_TIMConfig ();
+  LED_SPIConfig ();
+}
+
+
+// ----------------------------------------------------------------------------
+//
+// ----------------------------------------------------------------------------
+static void LED_TIMConfig ( void )
+{
+  NVIC_InitTypeDef         NVIC_InitStructure;
+  TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
+  
+  /* LED_TIMx clock enable */
+  LED_RCC_APBxPeriphClockCmd ( LED_TIM_RCC, ENABLE );
+  
+  /* Enable the LED_TIMx gloabal Interrupt */
+  NVIC_InitStructure.NVIC_IRQChannel         = LED_TIM_IRQx;
+  NVIC_InitStructure.NVIC_IRQChannelPriority = 2;                               // ��������� ��������� ����, ��� � ������ NixieDriver
+  NVIC_InitStructure.NVIC_IRQChannelCmd      = ENABLE;
+  NVIC_Init ( &NVIC_InitStructure );
+
+  /* -----------------------------------------------------------------------
+   In this example TIM7 counter clock (TIM7CLK) is set to APB1 clock (PCLK1), since
+   APB1 prescaler is set to 1 and TIM7 prescaler is set to 0.
+  
+  In this example TIM7 input clock (TIM7CLK) is set to APB1 clock (PCLK1), 
+  since APB1 prescaler is set to 1.   
+  TIM7CLK = PCLK1 = HCLK = SystemCoreClock
+  
+  With Prescaler set to 479 and Period to 24999, the TIM7 counter is updated each 250 ms
+  (i.e. and interrupt is generated each 250 ms)
+     TIM7 counter clock = TIM7CLK /((Prescaler + 1)*(Period + 1))
+                        = 48 MHz / ((25000)*(480))
+                        = 4 Hz 
+     ==> TIM7 counter period = 250 ms
+
+  Note:
+  SystemCoreClock variable holds HCLK frequency and is defined in system_stm32f0xx.c file.
+  Each time the core clock (HCLK) changes, user had to call SystemCoreClockUpdate()
+  function to update SystemCoreClock variable value. Otherwise, any configuration
+  based on this variable will be incorrect.    
+  ----------------------------------------------------------------------- */ 
+  
+  /* Time base configuration */
+  TIM_TimeBaseStructure.TIM_Period        = 1000;                               // ��� ������������� //24999
+  TIM_TimeBaseStructure.TIM_Prescaler     = (SystemCoreClock/1000000)-1;        //479;
+  TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
+  TIM_TimeBaseStructure.TIM_CounterMode   = TIM_CounterMode_Up;
+  //TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;
+  TIM_TimeBaseInit ( LED_TIMx, &TIM_TimeBaseStructure );
+  
+  /* LED_TIMx Interrupts enable */
+  TIM_ITConfig ( LED_TIMx, TIM_IT_Update, ENABLE );
+  
+  /* LED_TIMx enable counter */
+  TIM_Cmd ( LED_TIMx, ENABLE );
+}
+
+
+// ----------------------------------------------------------------------------
+//
+// ----------------------------------------------------------------------------
+static void LED_SPIConfig ( void )
+{
+  GPIO_InitTypeDef  GPIO_InitStructure;
+  SPI_InitTypeDef   SPI_InitStructure;
+  NVIC_InitTypeDef  NVIC_InitStructure;
+  
+  /* Enable the SPI periph */
+  LED_SPIx_RCC_APBxPeriphClockCmd ( LED_SPIx_CLK, ENABLE );
+  
+  /* Enable SCK, MOSI, MISO and NSS GPIO clocks */
+  RCC_AHBPeriphClockCmd ( LED_SPIx_SCK_GPIO_CLK     | 
+                          LED_SPIx_MOSI_GPIO_CLK    | 
+                          LED_SPIx_ST_GPIO_CLK,
+                          ENABLE );
+  
+  GPIO_PinAFConfig ( LED_SPIx_SCK_GPIO_PORT,  LED_SPIx_SCK_SOURCE,  LED_SPIx_SCK_AF  );
+  GPIO_PinAFConfig ( LED_SPIx_MOSI_GPIO_PORT, LED_SPIx_MOSI_SOURCE, LED_SPIx_MOSI_AF );
+  //GPIO_PinAFConfig ( LED_SPIx_ST_GPIO_PORT,   LED_SPIx_ST_SOURCE,   LED_SPIx_ST_AF   );
+  
+  GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_AF;
+  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+  GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_DOWN;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_Level_3;
+
+  /* SPI SCK pin configuration */
+  GPIO_InitStructure.GPIO_Pin = LED_SPIx_SCK_PIN;
+  GPIO_Init ( LED_SPIx_SCK_GPIO_PORT, &GPIO_InitStructure );
+
+  /* SPI MOSI pin configuration */
+  GPIO_InitStructure.GPIO_Pin = LED_SPIx_MOSI_PIN;
+  GPIO_Init ( LED_SPIx_MOSI_GPIO_PORT, &GPIO_InitStructure );
+  
+  /* GPIO ST pin configuration */
+  GPIO_InitStructure.GPIO_Pin   = LED_SPIx_ST_PIN;
+  //GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_AF;
+  GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_OUT;
+  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+  //GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_DOWN;
+  GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_NOPULL;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_Level_3;
+  GPIO_Init ( LED_SPIx_ST_GPIO_PORT, &GPIO_InitStructure );
+  
+  /* SPI configuration -------------------------------------------------------*/
+  SPI_I2S_DeInit ( LED_SPIx );
+  //SPI_InitStructure.SPI_Direction         = SPI_Direction_1Line_Tx;             //SPI_Direction_2Lines_FullDuplex
+  SPI_InitStructure.SPI_Direction         = SPI_Direction_2Lines_FullDuplex;     
+  SPI_InitStructure.SPI_DataSize          = SPI_DataSize_16b;
+  SPI_InitStructure.SPI_CPOL              = SPI_CPOL_Low;
+  SPI_InitStructure.SPI_CPHA              = SPI_CPHA_1Edge;
+  SPI_InitStructure.SPI_NSS               = SPI_NSS_Soft;
+  SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_64;
+  SPI_InitStructure.SPI_FirstBit          = SPI_FirstBit_MSB;
+  SPI_InitStructure.SPI_CRCPolynomial     = 7;
+  SPI_InitStructure.SPI_Mode              = SPI_Mode_Master;
+  SPI_Init ( LED_SPIx, &SPI_InitStructure );
+    
+  /* Enable the SPI peripheral */
+  SPI_Cmd ( LED_SPIx, ENABLE );
+  
+  /* Configure the SPI interrupt priority */
+  NVIC_InitStructure.NVIC_IRQChannel         = LED_SPIx_IRQn;
+  NVIC_InitStructure.NVIC_IRQChannelPriority = 0;
+  NVIC_InitStructure.NVIC_IRQChannelCmd      = ENABLE;
+  NVIC_Init ( &NVIC_InitStructure );
+  
+  /* Enable the Rx buffer not empty interrupt */
+  SPI_I2S_ITConfig ( LED_SPIx, SPI_I2S_IT_RXNE, ENABLE );
+  
+  LED_ST_PIN_RESET;
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+