diff options
Diffstat (limited to 'Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_can.h')
| -rw-r--r-- | Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_can.h | 643 |
1 files changed, 0 insertions, 643 deletions
diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_can.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_can.h deleted file mode 100644 index 60a4098..0000000 --- a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_can.h +++ /dev/null @@ -1,643 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_can.h - * @author MCD Application Team - * @version V1.3.0 - * @date 16-January-2014 - * @brief This file contains all the functions prototypes for the CAN firmware - * library, applicable only for STM32F072 devices. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> - * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_CAN_H -#define __STM32F0xx_CAN_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx.h" - -/** @addtogroup STM32F0xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup CAN - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN)) - -/** - * @brief CAN init structure definition - */ -typedef struct -{ - uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. - It ranges from 1 to 1024. */ - - uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. - This parameter can be a value of @ref CAN_operating_mode */ - - uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta - the CAN hardware is allowed to lengthen or - shorten a bit to perform resynchronization. - This parameter can be a value of @ref CAN_synchronisation_jump_width */ - - uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit - Segment 1. This parameter can be a value of - @ref CAN_time_quantum_in_bit_segment_1 */ - - uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit Segment 2. - This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ - - FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered communication mode. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off management. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_NART; /*!< Enable or disable the non-automatic retransmission mode. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. - This parameter can be set either to ENABLE or DISABLE. */ -} CAN_InitTypeDef; - -/** - * @brief CAN filter init structure definition - */ -typedef struct -{ - uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit - configuration, first one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit - configuration, second one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, - according to the mode (MSBs for a 32-bit configuration, - first one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, - according to the mode (LSBs for a 32-bit configuration, - second one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. - This parameter can be a value of @ref CAN_filter_FIFO */ - - uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ - - uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. - This parameter can be a value of @ref CAN_filter_mode */ - - uint8_t CAN_FilterScale; /*!< Specifies the filter scale. - This parameter can be a value of @ref CAN_filter_scale */ - - FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. - This parameter can be set either to ENABLE or DISABLE. */ -} CAN_FilterInitTypeDef; - -/** - * @brief CAN Tx message structure definition - */ -typedef struct -{ - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter can be a value between 0 to 0x7FF. */ - - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter can be a value between 0 to 0x1FFFFFFF. */ - - uint8_t IDE; /*!< Specifies the type of identifier for the message that - will be transmitted. This parameter can be a value - of @ref CAN_identifier_type */ - - uint8_t RTR; /*!< Specifies the type of frame for the message that will - be transmitted. This parameter can be a value of - @ref CAN_remote_transmission_request */ - - uint8_t DLC; /*!< Specifies the length of the frame that will be - transmitted. This parameter can be a value between - 0 to 8 */ - - uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 - to 0xFF. */ -} CanTxMsg; - -/** - * @brief CAN Rx message structure definition - */ -typedef struct -{ - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter can be a value between 0 to 0x7FF. */ - - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter can be a value between 0 to 0x1FFFFFFF. */ - - uint8_t IDE; /*!< Specifies the type of identifier for the message that - will be received. This parameter can be a value of - @ref CAN_identifier_type */ - - uint8_t RTR; /*!< Specifies the type of frame for the received message. - This parameter can be a value of - @ref CAN_remote_transmission_request */ - - uint8_t DLC; /*!< Specifies the length of the frame that will be received. - This parameter can be a value between 0 to 8 */ - - uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to - 0xFF. */ - - uint8_t FMI; /*!< Specifies the index of the filter the message stored in - the mailbox passes through. This parameter can be a - value between 0 to 0xFF */ -} CanRxMsg; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup CAN_Exported_Constants - * @{ - */ - -/** @defgroup CAN_InitStatus - * @{ - */ - -#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ -#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ - - -/* Legacy defines */ -#define CANINITFAILED CAN_InitStatus_Failed -#define CANINITOK CAN_InitStatus_Success -/** - * @} - */ - -/** @defgroup CAN_operating_mode - * @{ - */ - -#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ -#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ -#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ -#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ - -#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ - ((MODE) == CAN_Mode_LoopBack)|| \ - ((MODE) == CAN_Mode_Silent) || \ - ((MODE) == CAN_Mode_Silent_LoopBack)) -/** - * @} - */ - - - /** - * @defgroup CAN_operating_mode - * @{ - */ -#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ -#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ -#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ - - -#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ - ((MODE) == CAN_OperatingMode_Normal)|| \ - ((MODE) == CAN_OperatingMode_Sleep)) -/** - * @} - */ - -/** - * @defgroup CAN_operating_mode_status - * @{ - */ - -#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ -#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ -/** - * @} - */ - -/** @defgroup CAN_synchronisation_jump_width - * @{ - */ -#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ - -#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ - ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) -/** - * @} - */ - -/** @defgroup CAN_time_quantum_in_bit_segment_1 - * @{ - */ -#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ -#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ -#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ -#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ -#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ -#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ -#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ -#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ -#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ -#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ -#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ -#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ -#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ - -#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) -/** - * @} - */ - -/** @defgroup CAN_time_quantum_in_bit_segment_2 - * @{ - */ -#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ -#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ -#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ -#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ -#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ - -#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) -/** - * @} - */ - -/** @defgroup CAN_clock_prescaler - * @{ - */ -#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) -/** - * @} - */ - -/** @defgroup CAN_filter_number - * @{ - */ -#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) -/** - * @} - */ - -/** @defgroup CAN_filter_mode - * @{ - */ -#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ -#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ - -#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ - ((MODE) == CAN_FilterMode_IdList)) -/** - * @} - */ - -/** @defgroup CAN_filter_scale - * @{ - */ -#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ -#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ - -#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ - ((SCALE) == CAN_FilterScale_32bit)) -/** - * @} - */ - -/** @defgroup CAN_filter_FIFO - * @{ - */ -#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ -#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ -#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ - ((FIFO) == CAN_FilterFIFO1)) - -/* Legacy defines */ -#define CAN_FilterFIFO0 CAN_Filter_FIFO0 -#define CAN_FilterFIFO1 CAN_Filter_FIFO1 -/** - * @} - */ - -/** @defgroup CAN_Start_bank_filter_for_slave_CAN - * @{ - */ -#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) -/** - * @} - */ - -/** @defgroup CAN_Tx - * @{ - */ -#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) -#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) -#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) -#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) -/** - * @} - */ - -/** @defgroup CAN_identifier_type - * @{ - */ -#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ -#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ -#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ - ((IDTYPE) == CAN_Id_Extended)) - -/* Legacy defines */ -#define CAN_ID_STD CAN_Id_Standard -#define CAN_ID_EXT CAN_Id_Extended -/** - * @} - */ - -/** @defgroup CAN_remote_transmission_request - * @{ - */ -#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ -#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ -#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) - -/* Legacy defines */ -#define CAN_RTR_DATA CAN_RTR_Data -#define CAN_RTR_REMOTE CAN_RTR_Remote -/** - * @} - */ - -/** @defgroup CAN_transmit_constants - * @{ - */ -#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ -#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ -#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ -#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide - an empty mailbox */ -/* Legacy defines */ -#define CANTXFAILED CAN_TxStatus_Failed -#define CANTXOK CAN_TxStatus_Ok -#define CANTXPENDING CAN_TxStatus_Pending -#define CAN_NO_MB CAN_TxStatus_NoMailBox -/** - * @} - */ - -/** @defgroup CAN_receive_FIFO_number_constants - * @{ - */ -#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ -#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ - -#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) -/** - * @} - */ - -/** @defgroup CAN_sleep_constants - * @{ - */ -#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ -#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ - -/* Legacy defines */ -#define CANSLEEPFAILED CAN_Sleep_Failed -#define CANSLEEPOK CAN_Sleep_Ok -/** - * @} - */ - -/** @defgroup CAN_wake_up_constants - * @{ - */ -#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ -#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ - -/* Legacy defines */ -#define CANWAKEUPFAILED CAN_WakeUp_Failed -#define CANWAKEUPOK CAN_WakeUp_Ok -/** - * @} - */ - -/** - * @defgroup CAN_Error_Code_constants - * @{ - */ -#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ -#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ -#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ -#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ -#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ -#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ -#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ -#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ -/** - * @} - */ - -/** @defgroup CAN_flags - * @{ - */ -/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() - and CAN_ClearFlag() functions. */ -/* If the flag is 0x1XXXXXXX, it means that it can only be used with - CAN_GetFlagStatus() function. */ - -/* Transmit Flags */ -#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ -#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ -#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ - -/* Receive Flags */ -#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ -#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ -#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ -#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ -#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ -#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ - -/* Operating Mode Flags */ -#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ -#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ -/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. - In this case the SLAK bit can be polled.*/ - -/* Error Flags */ -#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ -#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ -#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ -#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ - -#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ - ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ - ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ - ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ - ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ - ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ - ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ - ((FLAG) == CAN_FLAG_SLAK )) - -#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ - ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ - ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ - ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ - ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) -/** - * @} - */ - - -/** @defgroup CAN_interrupts - * @{ - */ -#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ - -/* Receive Interrupts */ -#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ -#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ -#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ -#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ -#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ -#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ - -/* Operating Mode Interrupts */ -#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ -#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ - -/* Error Interrupts */ -#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ -#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ -#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ -#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ -#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ - -/* Flags named as Interrupts : kept only for FW compatibility */ -#define CAN_IT_RQCP0 CAN_IT_TME -#define CAN_IT_RQCP1 CAN_IT_TME -#define CAN_IT_RQCP2 CAN_IT_TME - - -#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ - ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ - ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) - -#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ - ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/* Function used to set the CAN configuration to the default reset state *****/ -void CAN_DeInit(CAN_TypeDef* CANx); - -/* Initialization and Configuration functions *********************************/ -uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); -void CAN_SlaveStartBank(uint8_t CAN_BankNumber); -void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); -void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); - -/* CAN Frames Transmission functions ******************************************/ -uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); -uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); -void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); - -/* CAN Frames Reception functions *********************************************/ -void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); -void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); -uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); - -/* Operation modes functions **************************************************/ -uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); -uint8_t CAN_Sleep(CAN_TypeDef* CANx); -uint8_t CAN_WakeUp(CAN_TypeDef* CANx); - -/* CAN Bus Error management functions *****************************************/ -uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); -uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); -uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); - -/* Interrupts and flags management functions **********************************/ -void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); -FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); -void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); -ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); -void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_CAN_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |