1 files changed, 0 insertions, 174 deletions
diff --git a/Libraries/TouchSense/STMTouch_Driver/src/tsl_time.c b/Libraries/TouchSense/STMTouch_Driver/src/tsl_time.c
deleted file mode 100644
index d274575..0000000
--- a/Libraries/TouchSense/STMTouch_Driver/src/tsl_time.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    tsl_time.c
-  * @author  MCD Application Team
-  * @version V1.4.4
-  * @date    31-March-2014
-  * @brief   This file contains all functions to manage the timings in general.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software
-  * distributed under the License is distributed on an "AS IS" BASIS,
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "tsl_time.h"
-#include "tsl_globals.h"
-
-/* Private typedefs ----------------------------------------------------------*/
-/* Private defines -----------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private functions prototype -----------------------------------------------*/
-
-/**
-  * @brief  Management of the timing module interrupt service routine.
-  * @param  None
-  * @retval None
-  */
-void TSL_tim_ProcessIT(void)
-{
-  static TSL_tTick_ms_T count_1s = 0;
-
-  // Count 1 global tick every xxx ms (defined by TSLPRM_TICK_FREQ parameter)
-  TSL_Globals.Tick_ms++;
-
-  // Check if 1 second has elapsed
-  count_1s++;
-  if (count_1s > (TSLPRM_TICK_FREQ - 1))
-  {
-    TSL_Globals.Tick_sec++; // 1 global tick every second
-    if (TSL_Globals.Tick_sec > 63)  // Due to DTO counter on 6 bits...
-    {
-      TSL_Globals.Tick_sec = 0;
-    }
-    count_1s = 0;
-  }
-
-// Callback function
-#if TSLPRM_USE_TIMER_CALLBACK > 0
-  TSL_CallBack_TimerTick();
-#endif
-
-}
-
-
-/**
-  * @brief  Check if a delay (in ms) has elapsed.
-  * This function must be called regularly due to counter Roll-over only managed one time.
-  * @param[in] delay_ms  Delay in ms
-  * @param[in] last_tick Variable holding the last tick value
-  * @retval Status
-  */
-TSL_Status_enum_T TSL_tim_CheckDelay_ms(TSL_tTick_ms_T delay_ms, __IO TSL_tTick_ms_T *last_tick)
-{
-  TSL_tTick_ms_T tick;
-  TSL_tTick_ms_T diff;
-
-  disableInterrupts();
-
-  tick = TSL_Globals.Tick_ms;
-
-  if (delay_ms == 0)
-  {
-    enableInterrupts();
-    return TSL_STATUS_ERROR;
-  }
-
-  // Counter Roll-over management
-  if (tick >= *last_tick)
-  {
-    diff = tick - *last_tick;
-  }
-  else
-  {
-    diff = (0xFFFF - *last_tick) + tick + 1;
-  }
-
-#if (TSLPRM_TICK_FREQ == 125)
-  if (diff >= (TSL_tTick_ms_T)(delay_ms >> 3)) // Divide by 8 for 8ms tick
-#endif
-#if (TSLPRM_TICK_FREQ == 250)
-  if (diff >= (TSL_tTick_ms_T)(delay_ms >> 2)) // Divide by 4 for 4ms tick
-#endif
-#if (TSLPRM_TICK_FREQ == 500)
-  if (diff >= (TSL_tTick_ms_T)(delay_ms >> 1)) // Divide by 2 for 2ms tick
-#endif
-#if (TSLPRM_TICK_FREQ == 1000)
-  if (diff >= (TSL_tTick_ms_T)delay_ms) // Direct value for 1ms tick
-#endif
-#if (TSLPRM_TICK_FREQ == 2000)
-  if (diff >= (TSL_tTick_ms_T)(delay_ms << 1)) // Multiply by 2 for 0.5ms tick
-#endif
-  {
-    // Save current time
-    *last_tick = tick;
-    enableInterrupts();
-    return TSL_STATUS_OK;
-  }
-
-  enableInterrupts();
-  return TSL_STATUS_BUSY;
-
-}
-
-
-/**
-  * @brief  Check if a delay (in s) has elapsed.
-  * @param[in] delay_sec  Delay in seconds
-  * @param[in] last_tick Variable holding the last tick value
-  * @retval Status
-  */
-TSL_Status_enum_T TSL_tim_CheckDelay_sec(TSL_tTick_sec_T delay_sec, __IO TSL_tTick_sec_T *last_tick)
-{
-  TSL_tTick_sec_T tick;
-  TSL_tTick_sec_T diff;
-
-  disableInterrupts();
-
-  tick = TSL_Globals.Tick_sec;
-
-  if (delay_sec == 0)
-  {
-    enableInterrupts();
-    return TSL_STATUS_ERROR;
-  }
-
-  // Counter Roll-over management
-  if (tick >= *last_tick)
-  {
-    diff = (TSL_tTick_sec_T)(tick - *last_tick);
-  }
-  else
-  {
-    diff = (TSL_tTick_sec_T)((63 - *last_tick) + tick + 1); // DTO counter is on 6 bits
-  }
-
-  if (diff >= delay_sec)
-  {
-    // Save current time
-    *last_tick = tick;
-    enableInterrupts();
-    return TSL_STATUS_OK;
-  }
-
-  enableInterrupts();
-  return TSL_STATUS_BUSY;
-
-}
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/