Split app code and third party libraries

1 files changed, 0 insertions, 599 deletions

diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_usart.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_usart.h
deleted file mode 100644
index c9d170a..0000000
--- a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_usart.h
+++ /dev/null
@@ -1,599 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_usart.h
-  * @author  MCD Application Team
-  * @version V1.3.0
-  * @date    16-January-2014
-  * @brief   This file contains all the functions prototypes for the USART 
-  *          firmware library.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_USART_H
-#define __STM32F0XX_USART_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup USART
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/
-
-   
-   
-/** 
-  * @brief  USART Init Structure definition  
-  */ 
-
-typedef struct
-{
-  uint32_t USART_BaudRate;            /*!< This member configures the USART communication baud rate.
-                                           The baud rate is computed using the following formula:
-                                            - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate)))
-                                            - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
-
-  uint32_t USART_WordLength;          /*!< Specifies the number of data bits transmitted or received in a frame.
-                                           This parameter can be a value of @ref USART_Word_Length */
-
-  uint32_t USART_StopBits;            /*!< Specifies the number of stop bits transmitted.
-                                           This parameter can be a value of @ref USART_Stop_Bits */
-
-  uint32_t USART_Parity;              /*!< Specifies the parity mode.
-                                           This parameter can be a value of @ref USART_Parity
-                                           @note When parity is enabled, the computed parity is inserted
-                                                 at the MSB position of the transmitted data (9th bit when
-                                                 the word length is set to 9 data bits; 8th bit when the
-                                                 word length is set to 8 data bits). */
- 
-  uint32_t USART_Mode;                /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
-                                           This parameter can be a value of @ref USART_Mode */
-
-  uint32_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
-                                           or disabled.
-                                           This parameter can be a value of @ref USART_Hardware_Flow_Control*/
-} USART_InitTypeDef;
-
-/** 
-  * @brief  USART Clock Init Structure definition
-  */ 
-
-typedef struct
-{
-  uint32_t USART_Clock;             /*!< Specifies whether the USART clock is enabled or disabled.
-                                         This parameter can be a value of @ref USART_Clock */
-
-  uint32_t USART_CPOL;              /*!< Specifies the steady state of the serial clock.
-                                         This parameter can be a value of @ref USART_Clock_Polarity */
-
-  uint32_t USART_CPHA;              /*!< Specifies the clock transition on which the bit capture is made.
-                                         This parameter can be a value of @ref USART_Clock_Phase */
-
-  uint32_t USART_LastBit;           /*!< Specifies whether the clock pulse corresponding to the last transmitted
-                                         data bit (MSB) has to be output on the SCLK pin in synchronous mode.
-                                         This parameter can be a value of @ref USART_Last_Bit */
-} USART_ClockInitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup USART_Exported_Constants
-  * @{
-  */ 
-
-#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
-                                     ((PERIPH) == USART2) || \
-                                     ((PERIPH) == USART3) || \
-                                     ((PERIPH) == USART4))
-
-#define IS_USART_12_PERIPH(PERIPH) (((PERIPH) == USART1) || \
-                                    ((PERIPH) == USART2))
-
-/** @defgroup USART_Word_Length 
-  * @{
-  */ 
-
-#define USART_WordLength_8b                  ((uint32_t)0x00000000)
-#define USART_WordLength_9b                  USART_CR1_M /* should be ((uint32_t)0x00001000) */
-#define USART_WordLength_7b                  ((uint32_t)0x10001000) /*!< only available for STM32F072 and STM32F030 devices */
-#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
-                                      ((LENGTH) == USART_WordLength_9b) || \
-                                      ((LENGTH) == USART_WordLength_7b))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Stop_Bits 
-  * @{
-  */ 
-
-#define USART_StopBits_1                     ((uint32_t)0x00000000)
-#define USART_StopBits_2                     USART_CR2_STOP_1
-#define USART_StopBits_1_5                   (USART_CR2_STOP_0 | USART_CR2_STOP_1)
-#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
-                                     ((STOPBITS) == USART_StopBits_2) || \
-                                     ((STOPBITS) == USART_StopBits_1_5))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Parity 
-  * @{
-  */ 
-
-#define USART_Parity_No                      ((uint32_t)0x00000000)
-#define USART_Parity_Even                    USART_CR1_PCE
-#define USART_Parity_Odd                     (USART_CR1_PCE | USART_CR1_PS) 
-#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
-                                 ((PARITY) == USART_Parity_Even) || \
-                                 ((PARITY) == USART_Parity_Odd))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Mode 
-  * @{
-  */ 
-
-#define USART_Mode_Rx                        USART_CR1_RE
-#define USART_Mode_Tx                        USART_CR1_TE
-#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && \
-                              ((MODE) != (uint32_t)0x00))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Hardware_Flow_Control 
-  * @{
-  */ 
-
-#define USART_HardwareFlowControl_None       ((uint32_t)0x00000000)
-#define USART_HardwareFlowControl_RTS        USART_CR3_RTSE
-#define USART_HardwareFlowControl_CTS        USART_CR3_CTSE
-#define USART_HardwareFlowControl_RTS_CTS    (USART_CR3_RTSE | USART_CR3_CTSE)
-#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
-                              (((CONTROL) == USART_HardwareFlowControl_None) || \
-                               ((CONTROL) == USART_HardwareFlowControl_RTS) || \
-                               ((CONTROL) == USART_HardwareFlowControl_CTS) || \
-                               ((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Clock 
-  * @{
-  */ 
-  
-#define USART_Clock_Disable                  ((uint32_t)0x00000000)
-#define USART_Clock_Enable                   USART_CR2_CLKEN
-#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
-                               ((CLOCK) == USART_Clock_Enable))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Clock_Polarity 
-  * @{
-  */
-  
-#define USART_CPOL_Low                       ((uint32_t)0x00000000)
-#define USART_CPOL_High                      USART_CR2_CPOL
-#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
-
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Clock_Phase
-  * @{
-  */
-
-#define USART_CPHA_1Edge                     ((uint32_t)0x00000000)
-#define USART_CPHA_2Edge                     USART_CR2_CPHA
-#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
-
-/**
-  * @}
-  */
-
-/** @defgroup USART_Last_Bit
-  * @{
-  */
-
-#define USART_LastBit_Disable                ((uint32_t)0x00000000)
-#define USART_LastBit_Enable                 USART_CR2_LBCL
-#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
-                                   ((LASTBIT) == USART_LastBit_Enable))
-/**
-  * @}
-  */
-  
-/** @defgroup USART_DMA_Requests 
-  * @{
-  */
-
-#define USART_DMAReq_Tx                      USART_CR3_DMAT
-#define USART_DMAReq_Rx                      USART_CR3_DMAR
-#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint32_t)0xFFFFFF3F) == 0x00) && \
-                                  ((DMAREQ) != (uint32_t)0x00))
-
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_DMA_Recception_Error
-  * @{
-  */
-
-#define USART_DMAOnError_Enable              ((uint32_t)0x00000000)
-#define USART_DMAOnError_Disable             USART_CR3_DDRE
-#define IS_USART_DMAONERROR(DMAERROR) (((DMAERROR) == USART_DMAOnError_Disable)|| \
-                                       ((DMAERROR) == USART_DMAOnError_Enable))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_MuteMode_WakeUp_methods
-  * @{
-  */
-
-#define USART_WakeUp_IdleLine                ((uint32_t)0x00000000)
-#define USART_WakeUp_AddressMark             USART_CR1_WAKE
-#define IS_USART_MUTEMODE_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
-                                          ((WAKEUP) == USART_WakeUp_AddressMark))
-/**
-  * @}
-  */
-
-/** @defgroup USART_Address_Detection
-  * @{
-  */ 
-
-#define USART_AddressLength_4b               ((uint32_t)0x00000000)
-#define USART_AddressLength_7b               USART_CR2_ADDM7
-#define IS_USART_ADDRESS_DETECTION(ADDRESS) (((ADDRESS) == USART_AddressLength_4b) || \
-                                             ((ADDRESS) == USART_AddressLength_7b))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_StopMode_WakeUp_methods
-  * @note     These parameters are only available for STM32F051 and STM32F072 devices 
-  * @{
-  */ 
-
-#define USART_WakeUpSource_AddressMatch      ((uint32_t)0x00000000)
-#define USART_WakeUpSource_StartBit          USART_CR3_WUS_1
-#define USART_WakeUpSource_RXNE              (USART_CR3_WUS_0 | USART_CR3_WUS_1)
-#define IS_USART_STOPMODE_WAKEUPSOURCE(SOURCE) (((SOURCE) == USART_WakeUpSource_AddressMatch) || \
-                                                ((SOURCE) == USART_WakeUpSource_StartBit) || \
-                                                ((SOURCE) == USART_WakeUpSource_RXNE))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_LIN_Break_Detection_Length 
-  * @{
-  */
-  
-#define USART_LINBreakDetectLength_10b       ((uint32_t)0x00000000)
-#define USART_LINBreakDetectLength_11b       USART_CR2_LBDL
-#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
-                               (((LENGTH) == USART_LINBreakDetectLength_10b) || \
-                                ((LENGTH) == USART_LINBreakDetectLength_11b))
-/**
-  * @}
-  */
-
-/** @defgroup USART_IrDA_Low_Power 
-  * @{
-  */
-
-#define USART_IrDAMode_LowPower              USART_CR3_IRLP
-#define USART_IrDAMode_Normal                ((uint32_t)0x00000000)
-#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
-                                  ((MODE) == USART_IrDAMode_Normal))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_DE_Polarity 
-  * @{
-  */
-
-#define USART_DEPolarity_High                ((uint32_t)0x00000000)
-#define USART_DEPolarity_Low                 USART_CR3_DEP
-#define IS_USART_DE_POLARITY(POLARITY) (((POLARITY) == USART_DEPolarity_Low) || \
-                                        ((POLARITY) == USART_DEPolarity_High))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Inversion_Pins 
-  * @{
-  */
-
-#define USART_InvPin_Tx                      USART_CR2_TXINV
-#define USART_InvPin_Rx                      USART_CR2_RXINV
-#define IS_USART_INVERSTION_PIN(PIN) ((((PIN) & (uint32_t)0xFFFCFFFF) == 0x00) && \
-                                       ((PIN) != (uint32_t)0x00))
-
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_AutoBaudRate_Mode 
-  * @{
-  */
-
-#define USART_AutoBaudRate_StartBit          ((uint32_t)0x00000000)
-#define USART_AutoBaudRate_FallingEdge       USART_CR2_ABRMODE_0
-#define IS_USART_AUTOBAUDRATE_MODE(MODE) (((MODE) == USART_AutoBaudRate_StartBit) || \
-                                          ((MODE) == USART_AutoBaudRate_FallingEdge))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_OVR_DETECTION
-  * @{
-  */
-
-#define USART_OVRDetection_Enable            ((uint32_t)0x00000000)
-#define USART_OVRDetection_Disable           USART_CR3_OVRDIS
-#define IS_USART_OVRDETECTION(OVR) (((OVR) == USART_OVRDetection_Enable)|| \
-                                    ((OVR) == USART_OVRDetection_Disable))
-/**
-  * @}
-  */ 
-/** @defgroup USART_Request 
-  * @{
-  */
-
-#define USART_Request_ABRRQ                  USART_RQR_ABRRQ
-#define USART_Request_SBKRQ                  USART_RQR_SBKRQ
-#define USART_Request_MMRQ                   USART_RQR_MMRQ
-#define USART_Request_RXFRQ                  USART_RQR_RXFRQ
-#define USART_Request_TXFRQ                  USART_RQR_TXFRQ
-
-#define IS_USART_REQUEST(REQUEST) (((REQUEST) == USART_Request_TXFRQ) || \
-                                   ((REQUEST) == USART_Request_RXFRQ) || \
-                                   ((REQUEST) == USART_Request_MMRQ) || \
-                                   ((REQUEST) == USART_Request_SBKRQ) || \
-                                   ((REQUEST) == USART_Request_ABRRQ))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Flags 
-  * @{
-  */
-#define USART_FLAG_REACK                     USART_ISR_REACK
-#define USART_FLAG_TEACK                     USART_ISR_TEACK
-#define USART_FLAG_WU                        USART_ISR_WUF /*!< Not available for  STM32F030 devices */
-#define USART_FLAG_RWU                       USART_ISR_RWU /*!< Not available for  STM32F030 devices */
-#define USART_FLAG_SBK                       USART_ISR_SBKF
-#define USART_FLAG_CM                        USART_ISR_CMF
-#define USART_FLAG_BUSY                      USART_ISR_BUSY
-#define USART_FLAG_ABRF                      USART_ISR_ABRF
-#define USART_FLAG_ABRE                      USART_ISR_ABRE
-#define USART_FLAG_EOB                       USART_ISR_EOBF /*!< Not available for  STM32F030 devices */
-#define USART_FLAG_RTO                       USART_ISR_RTOF
-#define USART_FLAG_nCTSS                     USART_ISR_CTS 
-#define USART_FLAG_CTS                       USART_ISR_CTSIF
-#define USART_FLAG_LBD                       USART_ISR_LBD /*!< Not available for  STM32F030 devices */
-#define USART_FLAG_TXE                       USART_ISR_TXE
-#define USART_FLAG_TC                        USART_ISR_TC
-#define USART_FLAG_RXNE                      USART_ISR_RXNE
-#define USART_FLAG_IDLE                      USART_ISR_IDLE
-#define USART_FLAG_ORE                       USART_ISR_ORE
-#define USART_FLAG_NE                        USART_ISR_NE
-#define USART_FLAG_FE                        USART_ISR_FE
-#define USART_FLAG_PE                        USART_ISR_PE
-#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
-                             ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
-                             ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
-                             ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
-                             ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \
-                             ((FLAG) == USART_FLAG_nCTSS) || ((FLAG) == USART_FLAG_RTO) || \
-                             ((FLAG) == USART_FLAG_EOB) || ((FLAG) == USART_FLAG_ABRE) || \
-                             ((FLAG) == USART_FLAG_ABRF) || ((FLAG) == USART_FLAG_BUSY) || \
-                             ((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_SBK) || \
-                             ((FLAG) == USART_FLAG_RWU) || ((FLAG) == USART_FLAG_WU) || \
-                             ((FLAG) == USART_FLAG_TEACK)|| ((FLAG) == USART_FLAG_REACK))
-
-#define IS_USART_CLEAR_FLAG(FLAG) (((FLAG) == USART_FLAG_WU) || ((FLAG) == USART_FLAG_TC) || \
-                                   ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_ORE) || \
-                                   ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \
-                                   ((FLAG) == USART_FLAG_LBD) || ((FLAG) == USART_FLAG_CTS) || \
-                                   ((FLAG) == USART_FLAG_RTO) || ((FLAG) == USART_FLAG_EOB) || \
-                                   ((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_PE))
-/**
-  * @}
-  */ 
-
-/** @defgroup USART_Interrupt_definition 
-  * @brief USART Interrupt definition
-  * USART_IT possible values
-  * Elements values convention: 0xZZZZYYXX
-  *   XX: Position of the corresponding Interrupt
-  *   YY: Register index
-  *   ZZZZ: Flag position
-  * @{
-  */
-
-#define USART_IT_WU                          ((uint32_t)0x00140316) /*!< Not available for  STM32F030 devices */
-#define USART_IT_CM                          ((uint32_t)0x0011010E)
-#define USART_IT_EOB                         ((uint32_t)0x000C011B) /*!< Not available for  STM32F030 devices */
-#define USART_IT_RTO                         ((uint32_t)0x000B011A)
-#define USART_IT_PE                          ((uint32_t)0x00000108)
-#define USART_IT_TXE                         ((uint32_t)0x00070107)
-#define USART_IT_TC                          ((uint32_t)0x00060106)
-#define USART_IT_RXNE                        ((uint32_t)0x00050105)
-#define USART_IT_IDLE                        ((uint32_t)0x00040104)
-#define USART_IT_LBD                         ((uint32_t)0x00080206) /*!< Not available for  STM32F030 devices */
-#define USART_IT_CTS                         ((uint32_t)0x0009030A) 
-#define USART_IT_ERR                         ((uint32_t)0x00000300)
-#define USART_IT_ORE                         ((uint32_t)0x00030300)
-#define USART_IT_NE                          ((uint32_t)0x00020300)
-#define USART_IT_FE                          ((uint32_t)0x00010300)
-
-#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
-                                ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
-                                ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
-                                ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR) || \
-                                ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
-                                ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
-
-#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
-                             ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
-                             ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
-                             ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
-                             ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE) || \
-                             ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
-                             ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
-
-#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_PE) || \
-                               ((IT) == USART_IT_FE) || ((IT) == USART_IT_NE) || \
-                               ((IT) == USART_IT_ORE) || ((IT) == USART_IT_IDLE) || \
-                               ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS) || \
-                               ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
-                               ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
-/**
-  * @}
-  */
-
-/** @defgroup USART_Global_definition 
-  * @{
-  */
-
-#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x005B8D81))
-#define IS_USART_DE_ASSERTION_DEASSERTION_TIME(TIME) ((TIME) <= 0x1F)
-#define IS_USART_AUTO_RETRY_COUNTER(COUNTER) ((COUNTER) <= 0x7)
-#define IS_USART_TIMEOUT(TIMEOUT) ((TIMEOUT) <= 0x00FFFFFF)
-#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-/* Initialization and Configuration functions *********************************/
-void USART_DeInit(USART_TypeDef* USARTx);
-void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
-void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
-void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
-void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
-void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_DirectionModeCmd(USART_TypeDef* USARTx, uint32_t USART_DirectionMode, FunctionalState NewState);
-void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); /* Not available for STM32F030 devices */
-void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_MSBFirstCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_DataInvCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_InvPinCmd(USART_TypeDef* USARTx, uint32_t USART_InvPin, FunctionalState NewState);
-void USART_SWAPPinCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_ReceiverTimeOutCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_SetReceiverTimeOut(USART_TypeDef* USARTx, uint32_t USART_ReceiverTimeOut);
-
-/* STOP Mode functions ********************************************************/
-void USART_STOPModeCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_StopModeWakeUpSourceConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUpSource); /* Not available for STM32F030 devices */
-
-/* AutoBaudRate functions *****************************************************/
-void USART_AutoBaudRateCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_AutoBaudRateConfig(USART_TypeDef* USARTx, uint32_t USART_AutoBaudRate);
-
-/* Data transfers functions ***************************************************/
-void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
-uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
-
-/* Multi-Processor Communication functions ************************************/
-void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
-void USART_MuteModeWakeUpConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUp);
-void USART_MuteModeCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_AddressDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_AddressLength);
-
-/* LIN mode functions *********************************************************/
-void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint32_t USART_LINBreakDetectLength); /* Not available for STM32F030 devices */
-void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */
-
-/* Half-duplex mode function **************************************************/
-void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-
-/* Smartcard mode functions ***************************************************/
-void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */
-void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */
-void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); /* Not available for STM32F030 devices */
-void USART_SetAutoRetryCount(USART_TypeDef* USARTx, uint8_t USART_AutoCount); /* Not available for STM32F030 devices */
-void USART_SetBlockLength(USART_TypeDef* USARTx, uint8_t USART_BlockLength); /* Not available for STM32F030 devices */
-
-/* IrDA mode functions ********************************************************/
-void USART_IrDAConfig(USART_TypeDef* USARTx, uint32_t USART_IrDAMode); /* Not available for STM32F030 devices */
-void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */
-
-/* RS485 mode functions *******************************************************/
-void USART_DECmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_DEPolarityConfig(USART_TypeDef* USARTx, uint32_t USART_DEPolarity);
-void USART_SetDEAssertionTime(USART_TypeDef* USARTx, uint32_t USART_DEAssertionTime);
-void USART_SetDEDeassertionTime(USART_TypeDef* USARTx, uint32_t USART_DEDeassertionTime);
-
-/* DMA transfers management functions *****************************************/
-void USART_DMACmd(USART_TypeDef* USARTx, uint32_t USART_DMAReq, FunctionalState NewState);
-void USART_DMAReceptionErrorConfig(USART_TypeDef* USARTx, uint32_t USART_DMAOnError);
-
-/* Interrupts and flags management functions **********************************/
-void USART_ITConfig(USART_TypeDef* USARTx, uint32_t USART_IT, FunctionalState NewState);
-void USART_RequestCmd(USART_TypeDef* USARTx, uint32_t USART_Request, FunctionalState NewState);
-void USART_OverrunDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_OVRDetection);
-FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint32_t USART_FLAG);
-void USART_ClearFlag(USART_TypeDef* USARTx, uint32_t USART_FLAG);
-ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint32_t USART_IT);
-void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint32_t USART_IT);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0XX_USART_H */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/