Split app code and third party libraries

1 files changed, 0 insertions, 408 deletions

diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_comp.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_comp.c
deleted file mode 100644
index f4b279c..0000000
--- a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_comp.c
+++ /dev/null
@@ -1,408 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_comp.c
-  * @author  MCD Application Team
-  * @version V1.3.0
-  * @date    16-January-2014
-  * @brief   This file provides firmware functions to manage the following 
-  *          functionalities of the comparators (COMP1 and COMP2) peripheral
-  *          applicable only on STM32F051 and STM32F072 devices: 
-  *           + Comparators configuration
-  *           + Window mode control
-  *
-  *  @verbatim
-  *
- ===============================================================================
-                     ##### How to use this driver #####
- ===============================================================================
-    [..]           
-   
-         The device integrates two analog comparators COMP1 and COMP2:
-         (+) The non inverting input is set to PA1 for COMP1 and to PA3
-             for COMP2.
-  
-         (+) The inverting input can be selected among: DAC1_OUT, DAC2_OUT 
-             1/4 VREFINT, 1/2 VERFINT, 3/4 VREFINT, VREFINT,
-             I/O (PA0 for COMP1 and PA2 for COMP2)
-  
-         (+) The COMP output is internally is available using COMP_GetOutputLevel()
-             and can be set on GPIO pins: PA0, PA6, PA11 for COMP1
-             and PA2, PA7, PA12 for COMP2
-  
-         (+) The COMP output can be redirected to embedded timers (TIM1, TIM2
-             and TIM3)
-  
-         (+) The two comparators COMP1 and COMP2 can be combined in window
-             mode and only COMP1 non inverting (PA1) can be used as non-
-             inverting input.
-  
-         (+) The two comparators COMP1 and COMP2 have interrupt capability 
-             with wake-up from Sleep and Stop modes (through the EXTI controller).
-             COMP1 and COMP2 outputs are internally connected to EXTI Line 21
-             and EXTI Line 22 respectively.
-                   
-
-                     ##### How to configure the comparator #####
- ===============================================================================
-    [..] 
-           This driver provides functions to configure and program the Comparators 
-           of all STM32F0xx devices.
-             
-    [..]   To use the comparator, perform the following steps:
-  
-         (#) Enable the SYSCFG APB clock to get write access to comparator
-             register using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
-  
-         (#) Configure the comparator input in analog mode using GPIO_Init()
-  
-         (#) Configure the comparator output in alternate function mode
-             using GPIO_Init() and use GPIO_PinAFConfig() function to map the
-             comparator output to the GPIO pin
-  
-         (#) Configure the comparator using COMP_Init() function:
-                 (++)  Select the inverting input
-                 (++)  Select the output polarity  
-                 (++)  Select the output redirection
-                 (++)  Select the hysteresis level
-                 (++)  Select the power mode
-    
-         (#) Enable the comparator using COMP_Cmd() function
-  
-         (#) If required enable the COMP interrupt by configuring and enabling
-             EXTI line in Interrupt mode and selecting the desired sensitivity
-             level using EXTI_Init() function. After that enable the comparator
-             interrupt vector using NVIC_Init() function.
-  
-     @endverbatim
-  *    
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_comp.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @defgroup COMP 
-  * @brief COMP driver modules
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* CSR register Mask */
-#define COMP_CSR_CLEAR_MASK              ((uint32_t)0x00003FFE)
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup COMP_Private_Functions
-  * @{
-  */
-
-/** @defgroup COMP_Group1 Initialization and Configuration functions
- *  @brief   Initialization and Configuration functions 
- *
-@verbatim   
- ===============================================================================
-               ##### Initialization and Configuration functions #####
- ===============================================================================  
-
-@endverbatim
-  * @{
-  */
-   
-/**
-  * @brief  Deinitializes COMP peripheral registers to their default reset values.
-  * @note   Deinitialization can't be performed if the COMP configuration is locked.
-  *         To unlock the configuration, perform a system reset.
-  * @param  None
-  * @retval None
-  */
-void COMP_DeInit(void)
-{
-  COMP->CSR = ((uint32_t)0x00000000);    /*!< Set COMP_CSR register to reset value */
-}
-
-/**
-  * @brief  Initializes the COMP peripheral according to the specified parameters
-  *         in COMP_InitStruct
-  * @note   If the selected comparator is locked, initialization can't be performed.
-  *         To unlock the configuration, perform a system reset.
-  * @note   By default, PA1 is selected as COMP1 non inverting input.
-  *         To use PA4 as COMP1 non inverting input call COMP_SwitchCmd() after COMP_Init()
-  * @param  COMP_Selection: the selected comparator. 
-  *          This parameter can be one of the following values:
-  *            @arg COMP_Selection_COMP1: COMP1 selected
-  *            @arg COMP_Selection_COMP2: COMP2 selected
-  * @param  COMP_InitStruct: pointer to an COMP_InitTypeDef structure that contains 
-  *         the configuration information for the specified COMP peripheral.
-  * @retval None
-  */
-void COMP_Init(uint32_t COMP_Selection, COMP_InitTypeDef* COMP_InitStruct)
-{
-  uint32_t tmpreg = 0;
-
-  /* Check the parameters */
-  assert_param(IS_COMP_ALL_PERIPH(COMP_Selection));
-  assert_param(IS_COMP_INVERTING_INPUT(COMP_InitStruct->COMP_InvertingInput));
-  assert_param(IS_COMP_OUTPUT(COMP_InitStruct->COMP_Output));
-  assert_param(IS_COMP_OUTPUT_POL(COMP_InitStruct->COMP_OutputPol));
-  assert_param(IS_COMP_HYSTERESIS(COMP_InitStruct->COMP_Hysteresis));
-  assert_param(IS_COMP_MODE(COMP_InitStruct->COMP_Mode));
-
-  /*!< Get the COMP_CSR register value */
-  tmpreg = COMP->CSR;
-
-  /*!< Clear the COMP1SW1, COMPx_IN_SEL, COMPx_OUT_TIM_SEL, COMPx_POL, COMPx_HYST and COMPx_PWR_MODE bits */ 
-  tmpreg &= (uint32_t) ~(COMP_CSR_CLEAR_MASK<<COMP_Selection);
-
-  /*!< Configure COMP: inverting input, output redirection, hysteresis value and power mode */
-  /*!< Set COMPxINSEL bits according to COMP_InitStruct->COMP_InvertingInput value */
-  /*!< Set COMPxOUTSEL bits according to COMP_InitStruct->COMP_Output value */
-  /*!< Set COMPxPOL bit according to COMP_InitStruct->COMP_OutputPol value */
-  /*!< Set COMPxHYST bits according to COMP_InitStruct->COMP_Hysteresis value */
-  /*!< Set COMPxMODE bits according to COMP_InitStruct->COMP_Mode value */   
-  tmpreg |= (uint32_t)((COMP_InitStruct->COMP_InvertingInput | COMP_InitStruct->COMP_Output |
-                       COMP_InitStruct->COMP_OutputPol | COMP_InitStruct->COMP_Hysteresis |
-                       COMP_InitStruct->COMP_Mode)<<COMP_Selection);
-
-  /*!< Write to COMP_CSR register */
-  COMP->CSR = tmpreg;  
-}
-
-/**
-  * @brief  Fills each COMP_InitStruct member with its default value.
-  * @param  COMP_InitStruct: pointer to an COMP_InitTypeDef structure which will 
-  *         be initialized.
-  * @retval None
-  */
-void COMP_StructInit(COMP_InitTypeDef* COMP_InitStruct)
-{
-  COMP_InitStruct->COMP_InvertingInput = COMP_InvertingInput_1_4VREFINT;
-  COMP_InitStruct->COMP_Output = COMP_Output_None;
-  COMP_InitStruct->COMP_OutputPol = COMP_OutputPol_NonInverted;
-  COMP_InitStruct->COMP_Hysteresis = COMP_Hysteresis_No;
-  COMP_InitStruct->COMP_Mode = COMP_Mode_UltraLowPower;
-}
-
-/**
-  * @brief  Enable or disable the COMP peripheral.
-  * @note   If the selected comparator is locked, enable/disable can't be performed.
-  *         To unlock the configuration, perform a system reset.
-  * @param  COMP_Selection: the selected comparator.
-  *          This parameter can be one of the following values:
-  *            @arg COMP_Selection_COMP1: COMP1 selected
-  *            @arg COMP_Selection_COMP2: COMP2 selected
-  * @param  NewState: new state of the COMP peripheral.
-  *          This parameter can be: ENABLE or DISABLE.
-  * @note   When enabled, the comparator compares the non inverting input with 
-  *         the inverting input and the comparison result is available on comparator output.
-  * @note   When disabled, the comparator doesn't perform comparison and the 
-  *         output level is low.
-  * @retval None
-  */
-void COMP_Cmd(uint32_t COMP_Selection, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_COMP_ALL_PERIPH(COMP_Selection));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-
-  if (NewState != DISABLE)
-  {
-    /* Enable the selected COMP peripheral */
-    COMP->CSR |= (uint32_t) (1<<COMP_Selection);
-  }
-  else
-  {
-    /* Disable the selected COMP peripheral  */
-    COMP->CSR &= (uint32_t)(~((uint32_t)1<<COMP_Selection));
-  }
-}
-
-/**
-  * @brief  Close or Open the SW1 switch.
-  * @note   This switch is solely intended to redirect signals onto high
-  *         impedance input, such as COMP1 non-inverting input (highly resistive switch)
-  * @param  NewState: New state of the analog switch.
-  *          This parameter can be: ENABLE or DISABLE. 
-  * @note   When enabled, the SW1 is closed; PA1 is connected to PA4
-  * @note   When disabled, the SW1 switch is open; PA1 is disconnected from PA4
-  * @retval None
-  */
-void COMP_SwitchCmd(FunctionalState NewState)
-{
-  /* Check the parameter */
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-
-  if (NewState != DISABLE)
-  {
-    /* Close SW1 switch */
-    COMP->CSR |= (uint32_t) (COMP_CSR_COMP1SW1);
-  }
-  else
-  {
-    /* Open SW1 switch */
-    COMP->CSR &= (uint32_t)(~COMP_CSR_COMP1SW1);
-  }
-}
-
-/**
-  * @brief  Return the output level (high or low) of the selected comparator. 
-  * @note   The output level depends on the selected polarity.
-  * @note   If the polarity is not inverted:
-  *          - Comparator output is low when the non-inverting input is at a lower
-  *            voltage than the inverting input
-  *          - Comparator output is high when the non-inverting input is at a higher
-  *            voltage than the inverting input
-  * @note   If the polarity is inverted:
-  *          - Comparator output is high when the non-inverting input is at a lower
-  *            voltage than the inverting input
-  *          - Comparator output is low when the non-inverting input is at a higher
-  *            voltage than the inverting input
-  * @param  COMP_Selection: the selected comparator. 
-  *          This parameter can be one of the following values:
-  *            @arg COMP_Selection_COMP1: COMP1 selected
-  *            @arg COMP_Selection_COMP2: COMP2 selected  
-  * @retval Returns the selected comparator output level: low or high.
-  *       
-  */
-uint32_t COMP_GetOutputLevel(uint32_t COMP_Selection)
-{
-  uint32_t compout = 0x0;
-
-  /* Check the parameters */
-  assert_param(IS_COMP_ALL_PERIPH(COMP_Selection));
-
-  /* Check if selected comparator output is high */
-  if ((COMP->CSR & (COMP_CSR_COMP1OUT<<COMP_Selection)) != 0)
-  {
-    compout = COMP_OutputLevel_High;
-  }
-  else
-  {
-    compout = COMP_OutputLevel_Low;
-  }
-
-  /* Return the comparator output level */
-  return (uint32_t)(compout);
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup COMP_Group2 Window mode control function
- *  @brief   Window mode control function 
- *
-@verbatim   
- ===============================================================================
-                     ##### Window mode control function #####
- ===============================================================================  
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Enables or disables the window mode.
-  * @note   In window mode, COMP1 and COMP2 non inverting inputs are connected
-  *         together and only COMP1 non inverting input (PA1) can be used.
-  * @param  NewState: new state of the window mode.
-  *          This parameter can be :
-  *           @arg ENABLE: COMP1 and COMP2 non inverting inputs are connected together.
-  *           @arg DISABLE: OMP1 and COMP2 non inverting inputs are disconnected.
-  * @retval None
-  */
-void COMP_WindowCmd(FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  
-  if (NewState != DISABLE)
-  {
-    /* Enable the window mode */
-    COMP->CSR |= (uint32_t) COMP_CSR_WNDWEN;
-  }
-  else
-  {
-    /* Disable the window mode */
-    COMP->CSR &= (uint32_t)(~COMP_CSR_WNDWEN);
-  }
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup COMP_Group3 COMP configuration locking function
- *  @brief   COMP1 and COMP2 configuration locking function
- *           COMP1 and COMP2 configuration can be locked each separately.
- *           Unlocking is performed by system reset.
- *
-@verbatim   
- ===============================================================================
-                     ##### Configuration Lock function #####
- ===============================================================================  
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Lock the selected comparator (COMP1/COMP2) configuration.
-  * @note   Locking the configuration means that all control bits are read-only.
-  *         To unlock the comparator configuration, perform a system reset.
-  * @param  COMP_Selection: selects the comparator to be locked 
-  *          This parameter can be a value of the following values:
-  *            @arg COMP_Selection_COMP1: COMP1 configuration is locked.
-  *            @arg COMP_Selection_COMP2: COMP2 configuration is locked.  
-  * @retval None
-  */
-void COMP_LockConfig(uint32_t COMP_Selection)
-{
-  /* Check the parameter */
-  assert_param(IS_COMP_ALL_PERIPH(COMP_Selection));
-
-  /* Set the lock bit corresponding to selected comparator */
-  COMP->CSR |= (uint32_t) (COMP_CSR_COMP1LOCK<<COMP_Selection);
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/