Split app code and third party libraries

1 files changed, 0 insertions, 218 deletions

diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dbgmcu.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dbgmcu.c
deleted file mode 100644
index 3965733..0000000
--- a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_dbgmcu.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_dbgmcu.c
-  * @author  MCD Application Team
-  * @version V1.3.0
-  * @date    16-January-2014
-  * @brief   This file provides firmware functions to manage the following 
-  *          functionalities of the Debug MCU (DBGMCU) peripheral:
-  *           + Device and Revision ID management
-  *           + Peripherals Configuration
-  *  @verbatim
-  *  @endverbatim
-  *
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_dbgmcu.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @defgroup DBGMCU 
-  * @brief DBGMCU driver modules
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define IDCODE_DEVID_MASK    ((uint32_t)0x00000FFF)
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup DBGMCU_Private_Functions 
-  * @{
-  */
-  
-
-/** @defgroup DBGMCU_Group1 Device and Revision ID management functions
- *  @brief   Device and Revision ID management functions
- *
-@verbatim
-  ==============================================================================
-            ##### Device and Revision ID management functions #####
-  ==============================================================================
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Returns the device revision identifier.
-  * @param  None
-  * @retval Device revision identifier
-  */
-uint32_t DBGMCU_GetREVID(void)
-{
-   return(DBGMCU->IDCODE >> 16);
-}
-
-/**
-  * @brief  Returns the device identifier.
-  * @param  None
-  * @retval Device identifier
-  */
-uint32_t DBGMCU_GetDEVID(void)
-{
-   return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
-}
-
-/**
-  * @}
-  */
-  
-/** @defgroup DBGMCU_Group2 Peripherals Configuration functions
- *  @brief   Peripherals Configuration
- *
-@verbatim
-  ==============================================================================
-               ##### Peripherals Configuration functions #####
-  ==============================================================================
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Configures low power mode behavior when the MCU is in Debug mode.
-  * @param  DBGMCU_Periph: specifies the low power mode.
-  *          This parameter can be any combination of the following values:
-  *             @arg DBGMCU_STOP: Keep debugger connection during STOP mode
-  *             @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
-  * @param  NewState: new state of the specified low power mode in Debug mode.
-  *          This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-
-  if (NewState != DISABLE)
-  {
-    DBGMCU->CR |= DBGMCU_Periph;
-  }
-  else
-  {
-    DBGMCU->CR &= ~DBGMCU_Periph;
-  }
-}
-
-
-/**
-  * @brief  Configures APB1 peripheral behavior when the MCU is in Debug mode.
-  * @param  DBGMCU_Periph: specifies the APB1 peripheral.
-  *          This parameter can be any combination of the following values:
-  *             @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted, 
-  *                  not applicable for STM32F030 devices   
-  *             @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
-  *             @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
-  *             @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted, 
-  *                  applicable only for STM32F072 devices               
-  *             @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
-  *             @arg DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter stopped 
-  *                                   when Core is halted.
-  *             @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
-  *             @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
-  *             @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped 
-  *                                             when Core is halted
-  *             @arg DBGMCU_CAN1_STOP: Debug CAN1 stopped when Core is halted, 
-  *                  applicable only for STM32F042 and STM32F072 devices               
-  * @param  NewState: new state of the specified APB1 peripheral in Debug mode.
-  *          This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-
-  if (NewState != DISABLE)
-  {
-    DBGMCU->APB1FZ |= DBGMCU_Periph;
-  }
-  else
-  {
-    DBGMCU->APB1FZ &= ~DBGMCU_Periph;
-  }
-}
-
-/**
-  * @brief  Configures APB2 peripheral behavior when the MCU is in Debug mode.
-  * @param  DBGMCU_Periph: specifies the APB2 peripheral.
-  *          This parameter can be any combination of the following values:
-  *             @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
-  *             @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
-  *             @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
-  *             @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
-  * @param  NewState: new state of the specified APB2 peripheral in Debug mode.
-  *          This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-
-  if (NewState != DISABLE)
-  {
-    DBGMCU->APB2FZ |= DBGMCU_Periph;
-  }
-  else
-  {
-    DBGMCU->APB2FZ &= ~DBGMCU_Periph;
-  }
-}
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/