Split app code and third party libraries

1 files changed, 0 insertions, 289 deletions

diff --git a/Project/src/main.c b/Project/src/main.c
deleted file mode 100644
index aa8c111..0000000
--- a/Project/src/main.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    STM32L152_Ex01_3TKeys_EVAL\src\main.c
-  * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    24-February-2014
-  * @brief   Basic example of how to use the STMTouch Driver.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software
-  * distributed under the License is distributed on an "AS IS" BASIS,
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/*
-  Здесь необходимо создать большой комментарий о характеристиках железа МК. Или
-же лучше создать отдельный файл и сделать на него ссылку. Кстати, такой файл
-создает программа STM32CubeMX.
-
-И вообще, нужно создать глобальную папку проекта, где будет лежать все по
-полочкам ( схема, программа, текстовые файлы, документация и тд )
-*/
-
-// Это программа для версии NixieClock_v2, которая является модифицированной версией предыдущей
-// NixieLUT
-
-/* Includes ------------------------------------------------------------------*/
-#include "time.h"
-#include "main.h"
-
-// FreeRTOS includes
-#include "FreeRTOS.h"
-#include "task.h"
-#include "queue.h"
-#include "semphr.h"
-
-#include "ltimers.h"
-#include "head_task.h"
-#include "button_task.h"
-#include "button_handler.h"
-#include "nixie_driver_task.h"
-#include "light_sensor_task.h"
-
-#ifdef LED_DRIVER
-#include "led_driver_task.h"
-#endif
-
-#include "indicate_modes_task.h"
-#include "tsl_user.h"
-#include "time.h"
-#include "stm32f0xx_usart.h"
-
-
-/* Private typedefs ----------------------------------------------------------*/
-/* Private defines -----------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-
-// Задаем размеры кучи для каждой задачи отдельно
-// - как правильно определить необходимый минимум для кучи задачи?
-
-#define STACK_SIZE_HEAD                ((unsigned short) 230)
-#define STACK_SIZE_NIXIE_DRIVER        ((unsigned short) 80)
-#define STACK_SIZE_BUTTON              ((unsigned short) 200)
-#define STACK_SIZE_LIGHT_SENSOR        ((unsigned short) 70)
-#ifdef LED_DRIVER
-#define STACK_SIZE_LED_DRIVER          ((unsigned short) 70)
-#endif
-#define STACK_SIZE_INDICATE_MODES      ((unsigned short) 250)
-
-/* Private functions prototype ---------------------------------------------- */
-
-static void USART1Init(void)
-{
-    RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
-    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
-    GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_1);
-    GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_1);
-    GPIO_InitTypeDef GPIO_InitStructure;
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_Level_3;
-    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
-    GPIO_Init(GPIOA, &GPIO_InitStructure);
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
-    GPIO_Init(GPIOA, &GPIO_InitStructure);
-    USART_InitTypeDef usart_init = {0};
-    usart_init.USART_BaudRate = 115200;
-    usart_init.USART_WordLength = USART_WordLength_8b;
-    usart_init.USART_StopBits = USART_StopBits_1;
-    usart_init.USART_Parity = USART_Parity_No;
-    usart_init.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
-    usart_init.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
-    USART_Init(USART1, &usart_init);
-    USART_Cmd(USART1, ENABLE);
-}
-
-static void USART4Init(void)
-{
-    RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART4, ENABLE);
-    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
-    GPIO_PinAFConfig(GPIOA, GPIO_PinSource0, GPIO_AF_4);
-    GPIO_PinAFConfig(GPIOA, GPIO_PinSource1, GPIO_AF_4);
-    GPIO_InitTypeDef GPIO_InitStructure;
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_Level_3;
-    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
-    GPIO_Init(GPIOA, &GPIO_InitStructure);
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
-    GPIO_Init(GPIOA, &GPIO_InitStructure);
-    USART_InitTypeDef usart_init = {0};
-    usart_init.USART_BaudRate = 9600;
-    usart_init.USART_WordLength = USART_WordLength_8b;
-    usart_init.USART_StopBits = USART_StopBits_1;
-    usart_init.USART_Parity = USART_Parity_No;
-    usart_init.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
-    usart_init.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
-    USART_Init(USART4, &usart_init);
-    USART_Cmd(USART4, ENABLE);
-}
-
-static void WIFI_IO_GPIOInit(void)
-{
-    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
-    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
-    GPIO_InitTypeDef GPIO_InitStructure;
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15;
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
-    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_Level_3;
-    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
-    GPIO_Init(GPIOA, &GPIO_InitStructure);
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
-    GPIO_Init(GPIOB, &GPIO_InitStructure);
-    GPIO_SetBits(GPIOB, GPIO_Pin_0); // WIFI_EN
-    GPIO_ResetBits(GPIOA, GPIO_Pin_15); // WIFI_IO0
-}
-
-static void USART3Init(void)
-{
-    RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
-    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
-    GPIO_PinAFConfig(GPIOB, GPIO_PinSource1, GPIO_AF_4);
-    GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_4);
-    GPIO_PinAFConfig(GPIOB, GPIO_PinSource11, GPIO_AF_4);
-    GPIO_PinAFConfig(GPIOB, GPIO_PinSource13, GPIO_AF_4);
-    GPIO_InitTypeDef GPIO_InitStructure;
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_Level_3;
-    GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-    GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
-    GPIO_Init(GPIOB, &GPIO_InitStructure);
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
-    GPIO_Init(GPIOB, &GPIO_InitStructure);
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
-    GPIO_Init(GPIOB, &GPIO_InitStructure);
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;
-    GPIO_Init(GPIOB, &GPIO_InitStructure);
-    USART_InitTypeDef usart_init = {0};
-    usart_init.USART_BaudRate = 115200;
-    usart_init.USART_WordLength = USART_WordLength_8b;
-    usart_init.USART_StopBits = USART_StopBits_1;
-    usart_init.USART_Parity = USART_Parity_No;
-    usart_init.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
-    usart_init.USART_HardwareFlowControl = USART_HardwareFlowControl_RTS_CTS;
-    USART_Init(USART3, &usart_init);
-    USART_Cmd(USART3, ENABLE);
-}
-
-// ----------------------------------------------------------------------------
-// Инициализация  до создания задач
-// ----------------------------------------------------------------------------
-void InitAll ( void )
-{
-    SystemInit();
-    WIFI_IO_GPIOInit();
-    USART1Init();
-    USART3Init();
-    USART4Init();
-    InitLTimers();
-    LightSensorInit();
-#if 0
-    NixieDriverInit();
-    HeadTaskInit();
-    IndicateModesInit();
-#endif
-#ifdef LED_DRIVER
-    LED_DriverInit();
-#endif
-    TSL_user_Init();
-    TimeInit();
-    ButtonInit();
-}
-
-static void TestUart(void *arg)
-{
-    (void) arg;
-    while (1) {
-        if (USART3->ISR & USART_ISR_RXNE) {
-            const uint16_t data = USART_ReceiveData(USART3);
-            USART_SendData(USART1, data);
-        }
-        if (USART1->ISR & USART_ISR_RXNE) {
-            const uint16_t data = USART_ReceiveData(USART1);
-            USART_SendData(USART3, data);
-        }
-    }
-}
-
-BaseType_t TaskSuccess;
-
-// Главный цикл ------------------------------------------------------------- //
-int main ()
-{
-    InitAll ();
-    // Создаем задачи FreeRTOS ----------------------------------------------- //
-
-    //  ВНИМАНИЕ !!!
-    //  Необходимо проверять кучу при создании задачи! ( и очереди )
-
-    // Если в программе используется подключаемая библиотека, которая использует
-    // ОСРВ, то задача должна там и создаватья. То есть это нужно оформить в
-    // в виде специальной функции
-    TaskSuccess = xTaskCreate(Button_Task, "Button_Task", STACK_SIZE_BUTTON, NULL, tskIDLE_PRIORITY + 2, NULL);
-    configASSERT(TaskSuccess);
-    TaskSuccess = xTaskCreate(LightSensor_Task, "LightSensor_Task", STACK_SIZE_LIGHT_SENSOR, NULL, tskIDLE_PRIORITY + 2, NULL);
-    configASSERT(TaskSuccess);
-#if 0
-    TaskSuccess = xTaskCreate(Head_Task, "Head_Task", STACK_SIZE_HEAD, NULL, tskIDLE_PRIORITY + 2, NULL);
-    configASSERT(TaskSuccess);
-    TaskSuccess = xTaskCreate(IndicateModes_Task, "IndicateModes_Task", STACK_SIZE_INDICATE_MODES, NULL, tskIDLE_PRIORITY + 2, NULL);
-    configASSERT(TaskSuccess);
-    TaskSuccess = xTaskCreate(NixieDriver_Task, "NixieDriver_Task", STACK_SIZE_NIXIE_DRIVER, NULL, tskIDLE_PRIORITY + 2, NULL);
-    configASSERT(TaskSuccess);
-#endif
-#ifdef LED_DRIVER
-    TaskSuccess = xTaskCreate(LED_Driver_Task, "LED_Driver_Task", STACK_SIZE_LED_DRIVER, NULL, tskIDLE_PRIORITY + 2, NULL);
-    configASSERT(TaskSuccess);
-#endif
-    TaskSuccess = xTaskCreate(TestUart, "TestUart", 200, NULL, tskIDLE_PRIORITY + 2, NULL);
-    configASSERT(TaskSuccess);
-    vTaskStartScheduler(); // И запускаем диспетчер задач ( он же планировщик )
-} // end of main
-
-
-
-#ifdef USE_FULL_ASSERT
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed ( uint8_t* file, uint32_t line )
-{
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
-  /* Infinite loop */
-  for (;;)
-  {
-  }
-}
-#endif
-
-
-// Специальные ф-ии FreeRTOS ------------------------------------------------ //
-void vApplicationMallocFailedHook ( void ) { for( ;; ); }
-void vApplicationStackOverflowHook ( TaskHandle_t pxTask, char *pcTaskName ) { for( ;; ); }
-void vApplicationIdleHook ( void ) { }
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/