Split app code and third party libraries

1 files changed, 401 insertions, 0 deletions

diff --git a/third_party/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm32l1xx.h b/third_party/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm32l1xx.h
new file mode 100644
index 0000000..e948768
--- /dev/null
+++ b/third_party/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm32l1xx.h
@@ -0,0 +1,401 @@
+/**
+  ******************************************************************************
+  * @file    tsl_check_config_stm32l1xx.h
+  * @author  MCD Application Team
+  * @version V1.4.4
+  * @date    31-March-2014
+  * @brief   This file contains the check of all parameters defined in the
+  *          STM32L1XX configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software
+  * distributed under the License is distributed on an "AS IS" BASIS,
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __TSL_CHECK_CONFIG_STM32L1XX_H
+#define __TSL_CHECK_CONFIG_STM32L1XX_H
+
+//------------------------------------------------------------------------------
+
+#if ((TSLPRM_TOTAL_CHANNELS < 1) || (TSLPRM_TOTAL_CHANNELS > 24))
+#error "TSLPRM_TOTAL_CHANNELS is out of range (1 .. 24)."
+#endif
+
+#if ((TSLPRM_TOTAL_BANKS < 1) || (TSLPRM_TOTAL_BANKS > 8))
+#error "TSLPRM_TOTAL_BANKS is out of range (1 .. 8)."
+#endif
+
+#if ((TSLPRM_TOTAL_TOUCHKEYS < 0) || (TSLPRM_TOTAL_TOUCHKEYS > 24))
+#error "TSLPRM_TOTAL_TOUCHKEYS is out of range (0 .. 24)."
+#endif
+
+#if ((TSLPRM_TOTAL_TOUCHKEYS_B < 0) || (TSLPRM_TOTAL_TOUCHKEYS_B > 24))
+#error "TSLPRM_TOTAL_TOUCHKEYS_B is out of range (0 .. 24)."
+#endif
+
+#if ((TSLPRM_TOTAL_LINROTS < 0) || (TSLPRM_TOTAL_LINROTS > 24))
+#error "TSLPRM_TOTAL_LINROTS is out of range (0 .. 24)."
+#endif
+
+#if ((TSLPRM_TOTAL_LINROTS_B < 0) || (TSLPRM_TOTAL_LINROTS_B > 24))
+#error "TSLPRM_TOTAL_LINROTS_B is out of range (0 .. 24)."
+#endif
+
+#if ((TSLPRM_TOTAL_OBJECTS < 1) || (TSLPRM_TOTAL_OBJECTS > 24))
+#error "TSLPRM_TOTAL_OBJECTS is out of range (1 .. 24)."
+#endif
+
+#if ((TSLPRM_TOTAL_TKEYS + TSLPRM_TOTAL_LNRTS) > 24)
+#error "The Sum of TouchKeys and Linear/Rotary sensors exceeds 24."
+#endif
+
+//------------------------------------------------------------------------------
+
+#ifndef TSLPRM_USE_SHIELD
+#error "TSLPRM_USE_SHIELD is not defined."
+#endif
+
+#if ((TSLPRM_USE_SHIELD < 0) || (TSLPRM_USE_SHIELD > 1))
+#error "TSLPRM_USE_SHIELD is out of range (0 .. 1)."
+#endif
+
+//------------------------------------------------------------------------------
+
+#ifndef TSLPRM_IODEF
+#error "TSLPRM_IODEF is not defined."
+#endif
+
+#if ((TSLPRM_IODEF < 0) || (TSLPRM_IODEF > 1))
+#error "TSLPRM_IODEF is out of range (0 .. 1)."
+#endif
+
+//------------------------------------------------------------------------------
+
+#if defined(STM32L1XX_MD) || defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_DELAY_TRANSFER
+#error "TSLPRM_DELAY_TRANSFER is not defined."
+#endif
+
+#if ((TSLPRM_DELAY_TRANSFER < 0) || (TSLPRM_DELAY_TRANSFER > 65535))
+#error "TSLPRM_DELAY_TRANSFER is out of range (0 .. 65535)."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if defined(STM32L1XX_MD) || defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_USE_SPREAD_SPECTRUM
+#error "TSLPRM_USE_SPREAD_SPECTRUM is not defined."
+#endif
+
+#if ((TSLPRM_USE_SPREAD_SPECTRUM < 0) || (TSLPRM_USE_SPREAD_SPECTRUM > 1))
+#error "TSLPRM_USE_SPREAD_SPECTRUM is out of range (0 .. 1)."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if defined(STM32L1XX_MD) || defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_SPREAD_MIN
+#error "TSLPRM_SPREAD_MIN is not defined."
+#endif
+
+#if (TSLPRM_USE_SPREAD_SPECTRUM == 1)
+#if ((TSLPRM_SPREAD_MIN < 1) || (TSLPRM_SPREAD_MIN >= TSLPRM_SPREAD_MAX))
+#error "TSLPRM_SPREAD_MIN is out of range (1 .. TSLPRM_SPREAD_MAX-1)."
+#endif
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if defined(STM32L1XX_MD) || defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_SPREAD_MAX
+#error "TSLPRM_SPREAD_MAX is not defined."
+#endif
+
+#if (TSLPRM_USE_SPREAD_SPECTRUM == 1)
+#if ((TSLPRM_SPREAD_MAX > 255) || (TSLPRM_SPREAD_MAX <= TSLPRM_SPREAD_MIN))
+#error "TSLPRM_SPREAD_MAX is out of range (TSLPRM_SPREAD_MIN+1 .. 255)."
+#endif
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_CT_PERIOD
+#error "TSLPRM_CT_PERIOD is not defined."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_TIMER_FREQ
+#error "TSLPRM_TIMER_FREQ is not defined."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#define TMP_RELOAD ((TSLPRM_CT_PERIOD * TSLPRM_TIMER_FREQ)/2)
+
+#if ((TMP_RELOAD < 4) || (TMP_RELOAD > 16534))
+#error "The calculated Timer RELOAD value is out of range (4 .. 65534)."
+#endif
+
+#if ((TMP_RELOAD % 2) != (0))
+#error "The calculated Timer RELOAD value is odd and must be even."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_PROTECT_IO_ACCESS
+#error "TSLPRM_PROTECT_IO_ACCESS is not defined."
+#endif
+
+#if ((TSLPRM_PROTECT_IO_ACCESS < 0) || (TSLPRM_PROTECT_IO_ACCESS > 1))
+#error "TSLPRM_PROTECT_IO_ACCESS is out of range (0 .. 1)."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_USE_GPIOA
+#error "TSLPRM_USE_GPIOA is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOA < 0) || (TSLPRM_USE_GPIOA > 1))
+#error "TSLPRM_USE_GPIOA is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOB
+#error "TSLPRM_USE_GPIOB is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOB < 0) || (TSLPRM_USE_GPIOB > 1))
+#error "TSLPRM_USE_GPIOB is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOC
+#error "TSLPRM_USE_GPIOC is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOC < 0) || (TSLPRM_USE_GPIOC > 1))
+#error "TSLPRM_USE_GPIOC is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOF
+#error "TSLPRM_USE_GPIOA is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOF < 0) || (TSLPRM_USE_GPIOF > 1))
+#error "TSLPRM_USE_GPIOF is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOG
+#error "TSLPRM_USE_GPIOG is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOG < 0) || (TSLPRM_USE_GPIOG > 1))
+#error "TSLPRM_USE_GPIOG is out of range (0 .. 1)."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if defined(STM32L1XX_MD)
+
+#ifndef TSLPRM_PROTECT_IO_ACCESS
+#error "TSLPRM_PROTECT_IO_ACCESS is not defined."
+#endif
+
+#if ((TSLPRM_PROTECT_IO_ACCESS < 0) || (TSLPRM_PROTECT_IO_ACCESS > 1))
+#error "TSLPRM_PROTECT_IO_ACCESS is out of range (0 .. 1)."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if defined(STM32L1XX_MD)
+
+#ifndef TSLPRM_USE_GPIOA
+#error "TSLPRM_USE_GPIOA is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOA < 0) || (TSLPRM_USE_GPIOA > 1))
+#error "TSLPRM_USE_GPIOA is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOB
+#error "TSLPRM_USE_GPIOB is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOB < 0) || (TSLPRM_USE_GPIOB > 1))
+#error "TSLPRM_USE_GPIOB is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOC
+#error "TSLPRM_USE_GPIOC is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOC < 0) || (TSLPRM_USE_GPIOC > 1))
+#error "TSLPRM_USE_GPIOC is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOF
+#error "TSLPRM_USE_GPIOA is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOF < 0) || (TSLPRM_USE_GPIOF > 1))
+#error "TSLPRM_USE_GPIOF is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOG
+#error "TSLPRM_USE_GPIOG is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOG < 0) || (TSLPRM_USE_GPIOG > 1))
+#error "TSLPRM_USE_GPIOG is out of range (0 .. 1)."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_CT_PERIOD
+#error "TSLPRM_CT_PERIOD is not defined."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_TIMER_FREQ
+#error "TSLPRM_TIMER_FREQ is not defined."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#define TMP_RELOAD ((TSLPRM_CT_PERIOD * TSLPRM_TIMER_FREQ)/2)
+
+#if ((TMP_RELOAD < 4) || (TMP_RELOAD > 16534))
+#error "The calculated Timer RELOAD value is out of range (4 .. 65534)."
+#endif
+
+#if ((TMP_RELOAD % 2) != (0))
+#error "The calculated Timer RELOAD value is odd and must be even."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if defined(STM32L1XX_MDP) && defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_PROTECT_IO_ACCESS
+#error "TSLPRM_PROTECT_IO_ACCESS is not defined."
+#endif
+
+#if ((TSLPRM_PROTECT_IO_ACCESS < 0) || (TSLPRM_PROTECT_IO_ACCESS > 1))
+#error "TSLPRM_PROTECT_IO_ACCESS is out of range (0 .. 1)."
+#endif
+
+#endif
+
+//------------------------------------------------------------------------------
+
+#if defined(STM32L1XX_MDP) && defined(TSLPRM_STM32L1XX_SW_ACQ)
+
+#ifndef TSLPRM_USE_GPIOA
+#error "TSLPRM_USE_GPIOA is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOA < 0) || (TSLPRM_USE_GPIOA > 1))
+#error "TSLPRM_USE_GPIOA is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOB
+#error "TSLPRM_USE_GPIOB is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOB < 0) || (TSLPRM_USE_GPIOB > 1))
+#error "TSLPRM_USE_GPIOB is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOC
+#error "TSLPRM_USE_GPIOC is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOC < 0) || (TSLPRM_USE_GPIOC > 1))
+#error "TSLPRM_USE_GPIOC is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOF
+#error "TSLPRM_USE_GPIOA is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOF < 0) || (TSLPRM_USE_GPIOF > 1))
+#error "TSLPRM_USE_GPIOF is out of range (0 .. 1)."
+#endif
+
+#ifndef TSLPRM_USE_GPIOG
+#error "TSLPRM_USE_GPIOG is not defined."
+#endif
+
+#if ((TSLPRM_USE_GPIOG < 0) || (TSLPRM_USE_GPIOG > 1))
+#error "TSLPRM_USE_GPIOG is out of range (0 .. 1)."
+#endif
+
+#endif
+
+#endif /* __TSL_CHECK_CONFIG_STM32L1XX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/