summaryrefslogtreecommitdiff
path: root/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crc.c
diff options
context:
space:
mode:
Diffstat (limited to 'Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crc.c')
-rw-r--r--Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crc.c361
1 files changed, 0 insertions, 361 deletions
diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crc.c b/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crc.c
deleted file mode 100644
index 05e1bf1..0000000
--- a/Libraries/STM32F0xx_StdPeriph_Driver/src/stm32f0xx_crc.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f0xx_crc.c
- * @author MCD Application Team
- * @version V1.3.0
- * @date 16-January-2014
- * @brief This file provides firmware functions to manage the following
- * functionalities of CRC computation unit peripheral:
- * + Configuration of the CRC computation unit
- * + CRC computation of one/many 32-bit data
- * + CRC Independent register (IDR) access
- *
- * @verbatim
- ===============================================================================
- ##### How to use this driver #####
- ===============================================================================
- [..]
-
- (+) Enable CRC AHB clock using RCC_AHBPeriphClockCmd(RCC_AHBPeriph_CRC, ENABLE)
- function
- (+) If required, select the reverse operation on input data
- using CRC_ReverseInputDataSelect()
- (+) If required, enable the reverse operation on output data
- using CRC_ReverseOutputDataCmd(Enable)
- (+) use CRC_CalcCRC() function to compute the CRC of a 32-bit data
- or use CRC_CalcBlockCRC() function to compute the CRC if a 32-bit
- data buffer
- (@) To compute the CRC of a new data use CRC_ResetDR() to reset
- the CRC computation unit before starting the computation
- otherwise you can get wrong CRC values.
-
- @endverbatim
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_crc.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
- * @{
- */
-
-/** @defgroup CRC
- * @brief CRC driver modules
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup CRC_Private_Functions
- * @{
- */
-
-/** @defgroup CRC_Group1 Configuration of the CRC computation unit functions
- * @brief Configuration of the CRC computation unit functions
- *
-@verbatim
- ===============================================================================
- ##### CRC configuration functions #####
- ===============================================================================
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Deinitializes CRC peripheral registers to their default reset values.
- * @param None
- * @retval None
- */
-void CRC_DeInit(void)
-{
- /* Set DR register to reset value */
- CRC->DR = 0xFFFFFFFF;
-
- /* Set the POL register to the reset value: 0x04C11DB7 */
- CRC->POL = 0x04C11DB7;
-
- /* Reset IDR register */
- CRC->IDR = 0x00;
-
- /* Set INIT register to reset value */
- CRC->INIT = 0xFFFFFFFF;
-
- /* Reset the CRC calculation unit */
- CRC->CR = CRC_CR_RESET;
-}
-
-/**
- * @brief Resets the CRC calculation unit and sets INIT register content in DR register.
- * @param None
- * @retval None
- */
-void CRC_ResetDR(void)
-{
- /* Reset CRC generator */
- CRC->CR |= CRC_CR_RESET;
-}
-
-/**
- * @brief Selects the polynomial size. This function is only applicable for
- * STM32F072 devices.
- * @param CRC_PolSize: Specifies the polynomial size.
- * This parameter can be:
- * @arg CRC_PolSize_7: 7-bit polynomial for CRC calculation
- * @arg CRC_PolSize_8: 8-bit polynomial for CRC calculation
- * @arg CRC_PolSize_16: 16-bit polynomial for CRC calculation
- * @arg CRC_PolSize_32: 32-bit polynomial for CRC calculation
- * @retval None
- */
-void CRC_PolynomialSizeSelect(uint32_t CRC_PolSize)
-{
- uint32_t tmpcr = 0;
-
- /* Check the parameter */
- assert_param(IS_CRC_POL_SIZE(CRC_PolSize));
-
- /* Get CR register value */
- tmpcr = CRC->CR;
-
- /* Reset POL_SIZE bits */
- tmpcr &= (uint32_t)~((uint32_t)CRC_CR_POLSIZE);
- /* Set the polynomial size */
- tmpcr |= (uint32_t)CRC_PolSize;
-
- /* Write to CR register */
- CRC->CR = (uint32_t)tmpcr;
-}
-
-/**
- * @brief Selects the reverse operation to be performed on input data.
- * @param CRC_ReverseInputData: Specifies the reverse operation on input data.
- * This parameter can be:
- * @arg CRC_ReverseInputData_No: No reverse operation is performed
- * @arg CRC_ReverseInputData_8bits: reverse operation performed on 8 bits
- * @arg CRC_ReverseInputData_16bits: reverse operation performed on 16 bits
- * @arg CRC_ReverseInputData_32bits: reverse operation performed on 32 bits
- * @retval None
- */
-void CRC_ReverseInputDataSelect(uint32_t CRC_ReverseInputData)
-{
- uint32_t tmpcr = 0;
-
- /* Check the parameter */
- assert_param(IS_CRC_REVERSE_INPUT_DATA(CRC_ReverseInputData));
-
- /* Get CR register value */
- tmpcr = CRC->CR;
-
- /* Reset REV_IN bits */
- tmpcr &= (uint32_t)~((uint32_t)CRC_CR_REV_IN);
- /* Set the reverse operation */
- tmpcr |= (uint32_t)CRC_ReverseInputData;
-
- /* Write to CR register */
- CRC->CR = (uint32_t)tmpcr;
-}
-
-/**
- * @brief Enables or disable the reverse operation on output data.
- * The reverse operation on output data is performed on 32-bit.
- * @param NewState: new state of the reverse operation on output data.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void CRC_ReverseOutputDataCmd(FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(NewState));
-
- if (NewState != DISABLE)
- {
- /* Enable reverse operation on output data */
- CRC->CR |= CRC_CR_REV_OUT;
- }
- else
- {
- /* Disable reverse operation on output data */
- CRC->CR &= (uint32_t)~((uint32_t)CRC_CR_REV_OUT);
- }
-}
-
-/**
- * @brief Initializes the INIT register.
- * @note After resetting CRC calculation unit, CRC_InitValue is stored in DR register
- * @param CRC_InitValue: Programmable initial CRC value
- * @retval None
- */
-void CRC_SetInitRegister(uint32_t CRC_InitValue)
-{
- CRC->INIT = CRC_InitValue;
-}
-
-/**
- * @brief Initializes the polynomail coefficients. This function is only
- * applicable for STM32F072 devices.
- * @param CRC_Pol: Polynomial to be used for CRC calculation.
- * @retval None
- */
-void CRC_SetPolynomial(uint32_t CRC_Pol)
-{
- CRC->POL = CRC_Pol;
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRC_Group2 CRC computation of one/many 32-bit data functions
- * @brief CRC computation of one/many 32-bit data functions
- *
-@verbatim
- ===============================================================================
- ##### CRC computation functions #####
- ===============================================================================
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Computes the 32-bit CRC of a given data word(32-bit).
- * @param CRC_Data: data word(32-bit) to compute its CRC
- * @retval 32-bit CRC
- */
-uint32_t CRC_CalcCRC(uint32_t CRC_Data)
-{
- CRC->DR = CRC_Data;
-
- return (CRC->DR);
-}
-
-/**
- * @brief Computes the 16-bit CRC of a given 16-bit data. This function is only
- * applicable for STM32F072 devices.
- * @param CRC_Data: data half-word(16-bit) to compute its CRC
- * @retval 16-bit CRC
- */
-uint32_t CRC_CalcCRC16bits(uint16_t CRC_Data)
-{
- *(uint16_t*)(CRC_BASE) = (uint16_t) CRC_Data;
-
- return (CRC->DR);
-}
-
-/**
- * @brief Computes the 8-bit CRC of a given 8-bit data. This function is only
- * applicable for STM32F072 devices.
- * @param CRC_Data: 8-bit data to compute its CRC
- * @retval 8-bit CRC
- */
-uint32_t CRC_CalcCRC8bits(uint8_t CRC_Data)
-{
- *(uint8_t*)(CRC_BASE) = (uint8_t) CRC_Data;
-
- return (CRC->DR);
-}
-
-/**
- * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit).
- * @param pBuffer: pointer to the buffer containing the data to be computed
- * @param BufferLength: length of the buffer to be computed
- * @retval 32-bit CRC
- */
-uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength)
-{
- uint32_t index = 0;
-
- for(index = 0; index < BufferLength; index++)
- {
- CRC->DR = pBuffer[index];
- }
- return (CRC->DR);
-}
-
-/**
- * @brief Returns the current CRC value.
- * @param None
- * @retval 32-bit CRC
- */
-uint32_t CRC_GetCRC(void)
-{
- return (CRC->DR);
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRC_Group3 CRC Independent Register (IDR) access functions
- * @brief CRC Independent Register (IDR) access (write/read) functions
- *
-@verbatim
- ===============================================================================
- ##### CRC Independent Register (IDR) access functions #####
- ===============================================================================
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Stores an 8-bit data in the Independent Data(ID) register.
- * @param CRC_IDValue: 8-bit value to be stored in the ID register
- * @retval None
- */
-void CRC_SetIDRegister(uint8_t CRC_IDValue)
-{
- CRC->IDR = CRC_IDValue;
-}
-
-/**
- * @brief Returns the 8-bit data stored in the Independent Data(ID) register
- * @param None
- * @retval 8-bit value of the ID register
- */
-uint8_t CRC_GetIDRegister(void)
-{
- return (CRC->IDR);
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-19 22:48:44 +0000