diff options
Diffstat (limited to 'Libraries/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm32l1xx.h')
| -rw-r--r-- | Libraries/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm32l1xx.h | 401 |
1 files changed, 0 insertions, 401 deletions
diff --git a/Libraries/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm32l1xx.h b/Libraries/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm32l1xx.h deleted file mode 100644 index e948768..0000000 --- a/Libraries/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm32l1xx.h +++ /dev/null @@ -1,401 +0,0 @@ -/** - ****************************************************************************** - * @file tsl_check_config_stm32l1xx.h - * @author MCD Application Team - * @version V1.4.4 - * @date 31-March-2014 - * @brief This file contains the check of all parameters defined in the - * STM32L1XX configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> - * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __TSL_CHECK_CONFIG_STM32L1XX_H -#define __TSL_CHECK_CONFIG_STM32L1XX_H - -//------------------------------------------------------------------------------ - -#if ((TSLPRM_TOTAL_CHANNELS < 1) || (TSLPRM_TOTAL_CHANNELS > 24)) -#error "TSLPRM_TOTAL_CHANNELS is out of range (1 .. 24)." -#endif - -#if ((TSLPRM_TOTAL_BANKS < 1) || (TSLPRM_TOTAL_BANKS > 8)) -#error "TSLPRM_TOTAL_BANKS is out of range (1 .. 8)." -#endif - -#if ((TSLPRM_TOTAL_TOUCHKEYS < 0) || (TSLPRM_TOTAL_TOUCHKEYS > 24)) -#error "TSLPRM_TOTAL_TOUCHKEYS is out of range (0 .. 24)." -#endif - -#if ((TSLPRM_TOTAL_TOUCHKEYS_B < 0) || (TSLPRM_TOTAL_TOUCHKEYS_B > 24)) -#error "TSLPRM_TOTAL_TOUCHKEYS_B is out of range (0 .. 24)." -#endif - -#if ((TSLPRM_TOTAL_LINROTS < 0) || (TSLPRM_TOTAL_LINROTS > 24)) -#error "TSLPRM_TOTAL_LINROTS is out of range (0 .. 24)." -#endif - -#if ((TSLPRM_TOTAL_LINROTS_B < 0) || (TSLPRM_TOTAL_LINROTS_B > 24)) -#error "TSLPRM_TOTAL_LINROTS_B is out of range (0 .. 24)." -#endif - -#if ((TSLPRM_TOTAL_OBJECTS < 1) || (TSLPRM_TOTAL_OBJECTS > 24)) -#error "TSLPRM_TOTAL_OBJECTS is out of range (1 .. 24)." -#endif - -#if ((TSLPRM_TOTAL_TKEYS + TSLPRM_TOTAL_LNRTS) > 24) -#error "The Sum of TouchKeys and Linear/Rotary sensors exceeds 24." -#endif - -//------------------------------------------------------------------------------ - -#ifndef TSLPRM_USE_SHIELD -#error "TSLPRM_USE_SHIELD is not defined." -#endif - -#if ((TSLPRM_USE_SHIELD < 0) || (TSLPRM_USE_SHIELD > 1)) -#error "TSLPRM_USE_SHIELD is out of range (0 .. 1)." -#endif - -//------------------------------------------------------------------------------ - -#ifndef TSLPRM_IODEF -#error "TSLPRM_IODEF is not defined." -#endif - -#if ((TSLPRM_IODEF < 0) || (TSLPRM_IODEF > 1)) -#error "TSLPRM_IODEF is out of range (0 .. 1)." -#endif - -//------------------------------------------------------------------------------ - -#if defined(STM32L1XX_MD) || defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_DELAY_TRANSFER -#error "TSLPRM_DELAY_TRANSFER is not defined." -#endif - -#if ((TSLPRM_DELAY_TRANSFER < 0) || (TSLPRM_DELAY_TRANSFER > 65535)) -#error "TSLPRM_DELAY_TRANSFER is out of range (0 .. 65535)." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if defined(STM32L1XX_MD) || defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_USE_SPREAD_SPECTRUM -#error "TSLPRM_USE_SPREAD_SPECTRUM is not defined." -#endif - -#if ((TSLPRM_USE_SPREAD_SPECTRUM < 0) || (TSLPRM_USE_SPREAD_SPECTRUM > 1)) -#error "TSLPRM_USE_SPREAD_SPECTRUM is out of range (0 .. 1)." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if defined(STM32L1XX_MD) || defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_SPREAD_MIN -#error "TSLPRM_SPREAD_MIN is not defined." -#endif - -#if (TSLPRM_USE_SPREAD_SPECTRUM == 1) -#if ((TSLPRM_SPREAD_MIN < 1) || (TSLPRM_SPREAD_MIN >= TSLPRM_SPREAD_MAX)) -#error "TSLPRM_SPREAD_MIN is out of range (1 .. TSLPRM_SPREAD_MAX-1)." -#endif -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if defined(STM32L1XX_MD) || defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_SPREAD_MAX -#error "TSLPRM_SPREAD_MAX is not defined." -#endif - -#if (TSLPRM_USE_SPREAD_SPECTRUM == 1) -#if ((TSLPRM_SPREAD_MAX > 255) || (TSLPRM_SPREAD_MAX <= TSLPRM_SPREAD_MIN)) -#error "TSLPRM_SPREAD_MAX is out of range (TSLPRM_SPREAD_MIN+1 .. 255)." -#endif -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_CT_PERIOD -#error "TSLPRM_CT_PERIOD is not defined." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_TIMER_FREQ -#error "TSLPRM_TIMER_FREQ is not defined." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ) - -#define TMP_RELOAD ((TSLPRM_CT_PERIOD * TSLPRM_TIMER_FREQ)/2) - -#if ((TMP_RELOAD < 4) || (TMP_RELOAD > 16534)) -#error "The calculated Timer RELOAD value is out of range (4 .. 65534)." -#endif - -#if ((TMP_RELOAD % 2) != (0)) -#error "The calculated Timer RELOAD value is odd and must be even." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_PROTECT_IO_ACCESS -#error "TSLPRM_PROTECT_IO_ACCESS is not defined." -#endif - -#if ((TSLPRM_PROTECT_IO_ACCESS < 0) || (TSLPRM_PROTECT_IO_ACCESS > 1)) -#error "TSLPRM_PROTECT_IO_ACCESS is out of range (0 .. 1)." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_USE_GPIOA -#error "TSLPRM_USE_GPIOA is not defined." -#endif - -#if ((TSLPRM_USE_GPIOA < 0) || (TSLPRM_USE_GPIOA > 1)) -#error "TSLPRM_USE_GPIOA is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOB -#error "TSLPRM_USE_GPIOB is not defined." -#endif - -#if ((TSLPRM_USE_GPIOB < 0) || (TSLPRM_USE_GPIOB > 1)) -#error "TSLPRM_USE_GPIOB is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOC -#error "TSLPRM_USE_GPIOC is not defined." -#endif - -#if ((TSLPRM_USE_GPIOC < 0) || (TSLPRM_USE_GPIOC > 1)) -#error "TSLPRM_USE_GPIOC is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOF -#error "TSLPRM_USE_GPIOA is not defined." -#endif - -#if ((TSLPRM_USE_GPIOF < 0) || (TSLPRM_USE_GPIOF > 1)) -#error "TSLPRM_USE_GPIOF is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOG -#error "TSLPRM_USE_GPIOG is not defined." -#endif - -#if ((TSLPRM_USE_GPIOG < 0) || (TSLPRM_USE_GPIOG > 1)) -#error "TSLPRM_USE_GPIOG is out of range (0 .. 1)." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if defined(STM32L1XX_MD) - -#ifndef TSLPRM_PROTECT_IO_ACCESS -#error "TSLPRM_PROTECT_IO_ACCESS is not defined." -#endif - -#if ((TSLPRM_PROTECT_IO_ACCESS < 0) || (TSLPRM_PROTECT_IO_ACCESS > 1)) -#error "TSLPRM_PROTECT_IO_ACCESS is out of range (0 .. 1)." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if defined(STM32L1XX_MD) - -#ifndef TSLPRM_USE_GPIOA -#error "TSLPRM_USE_GPIOA is not defined." -#endif - -#if ((TSLPRM_USE_GPIOA < 0) || (TSLPRM_USE_GPIOA > 1)) -#error "TSLPRM_USE_GPIOA is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOB -#error "TSLPRM_USE_GPIOB is not defined." -#endif - -#if ((TSLPRM_USE_GPIOB < 0) || (TSLPRM_USE_GPIOB > 1)) -#error "TSLPRM_USE_GPIOB is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOC -#error "TSLPRM_USE_GPIOC is not defined." -#endif - -#if ((TSLPRM_USE_GPIOC < 0) || (TSLPRM_USE_GPIOC > 1)) -#error "TSLPRM_USE_GPIOC is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOF -#error "TSLPRM_USE_GPIOA is not defined." -#endif - -#if ((TSLPRM_USE_GPIOF < 0) || (TSLPRM_USE_GPIOF > 1)) -#error "TSLPRM_USE_GPIOF is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOG -#error "TSLPRM_USE_GPIOG is not defined." -#endif - -#if ((TSLPRM_USE_GPIOG < 0) || (TSLPRM_USE_GPIOG > 1)) -#error "TSLPRM_USE_GPIOG is out of range (0 .. 1)." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_CT_PERIOD -#error "TSLPRM_CT_PERIOD is not defined." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_TIMER_FREQ -#error "TSLPRM_TIMER_FREQ is not defined." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if (defined(STM32L1XX_HD) || defined(STM32L1XX_XL)) && !defined(TSLPRM_STM32L1XX_SW_ACQ) - -#define TMP_RELOAD ((TSLPRM_CT_PERIOD * TSLPRM_TIMER_FREQ)/2) - -#if ((TMP_RELOAD < 4) || (TMP_RELOAD > 16534)) -#error "The calculated Timer RELOAD value is out of range (4 .. 65534)." -#endif - -#if ((TMP_RELOAD % 2) != (0)) -#error "The calculated Timer RELOAD value is odd and must be even." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if defined(STM32L1XX_MDP) && defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_PROTECT_IO_ACCESS -#error "TSLPRM_PROTECT_IO_ACCESS is not defined." -#endif - -#if ((TSLPRM_PROTECT_IO_ACCESS < 0) || (TSLPRM_PROTECT_IO_ACCESS > 1)) -#error "TSLPRM_PROTECT_IO_ACCESS is out of range (0 .. 1)." -#endif - -#endif - -//------------------------------------------------------------------------------ - -#if defined(STM32L1XX_MDP) && defined(TSLPRM_STM32L1XX_SW_ACQ) - -#ifndef TSLPRM_USE_GPIOA -#error "TSLPRM_USE_GPIOA is not defined." -#endif - -#if ((TSLPRM_USE_GPIOA < 0) || (TSLPRM_USE_GPIOA > 1)) -#error "TSLPRM_USE_GPIOA is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOB -#error "TSLPRM_USE_GPIOB is not defined." -#endif - -#if ((TSLPRM_USE_GPIOB < 0) || (TSLPRM_USE_GPIOB > 1)) -#error "TSLPRM_USE_GPIOB is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOC -#error "TSLPRM_USE_GPIOC is not defined." -#endif - -#if ((TSLPRM_USE_GPIOC < 0) || (TSLPRM_USE_GPIOC > 1)) -#error "TSLPRM_USE_GPIOC is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOF -#error "TSLPRM_USE_GPIOA is not defined." -#endif - -#if ((TSLPRM_USE_GPIOF < 0) || (TSLPRM_USE_GPIOF > 1)) -#error "TSLPRM_USE_GPIOF is out of range (0 .. 1)." -#endif - -#ifndef TSLPRM_USE_GPIOG -#error "TSLPRM_USE_GPIOG is not defined." -#endif - -#if ((TSLPRM_USE_GPIOG < 0) || (TSLPRM_USE_GPIOG > 1)) -#error "TSLPRM_USE_GPIOG is out of range (0 .. 1)." -#endif - -#endif - -#endif /* __TSL_CHECK_CONFIG_STM32L1XX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |