1 files changed, 0 insertions, 160 deletions
diff --git a/third_party/Time/time.c b/third_party/Time/time.c
deleted file mode 100644
index 4159f44..0000000
--- a/third_party/Time/time.c
+++ /dev/null
@@ -1,160 +0,0 @@
-
-#include "time.h"
-#include "stm32f0xx_conf.h"
-
-/* Uncomment the corresponding line to select the RTC Clock source */
-#define RTC_CLOCK_SOURCE_LSE   /* LSE used as RTC source clock */
-//#define RTC_CLOCK_SOURCE_LSI  // LSI used as RTC source clock. The RTC Clock
-                                // may varies due to LSI frequency dispersion
-
-#define BKP_VALUE    0x32F0
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-__IO uint32_t AsynchPrediv = 0, SynchPrediv = 0;
-
-/* Private function prototypes -----------------------------------------------*/
-static void RTC_Config(void);
-static void RTC_TimeRegulate(void);
-
-
-// - калибровку RTC как делать?
-
-
-// ----------------------------------------------------------------------------
-//
-// ----------------------------------------------------------------------------
-void TimeInit (void)
-{
-  RTC_InitTypeDef RTC_InitStructure;
-
-  if (RTC_ReadBackupRegister(RTC_BKP_DR0) != BKP_VALUE)
-  //if (SynchPrediv == 0)
-  {
-    /* RTC configuration  */
-    RTC_Config();
-
-    /* Configure the RTC data register and RTC prescaler */
-    RTC_InitStructure.RTC_AsynchPrediv = AsynchPrediv;
-    RTC_InitStructure.RTC_SynchPrediv = SynchPrediv;
-    RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
-
-    /* Check on RTC init */
-    if (RTC_Init(&RTC_InitStructure) == ERROR)
-    {
-     // printf("\n\r        /!\\***** RTC Prescaler Config failed ********/!\\ \n\r");
-    }
-
-    /* Configure the time register */
-    RTC_TimeRegulate();
-  }
-  else
-  {
-    /* Check if the Power On Reset flag is set */
-    if (RCC_GetFlagStatus(RCC_FLAG_PORRST) != RESET)
-    {
-      //printf("\r\n Power On Reset occurred....\n\r");
-    }
-    /* Check if the Pin Reset flag is set */
-    else if (RCC_GetFlagStatus(RCC_FLAG_PINRST) != RESET)
-    {
-     // printf("\r\n External Reset occurred....\n\r");
-    }
-
-    //printf("\n\r No need to configure RTC....\n\r");
-
-    /* Enable the PWR clock */
-    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
-
-    /* Allow access to RTC */
-    PWR_BackupAccessCmd(ENABLE);
-
- #ifdef RTC_CLOCK_SOURCE_LSI
-    /* Enable the LSI OSC */
-    RCC_LSICmd(ENABLE);
- #endif /* RTC_CLOCK_SOURCE_LSI */
-
-    /* Wait for RTC APB registers synchronisation */
-    RTC_WaitForSynchro();
-
-    /* Clear the RTC Alarm Flag */
-    RTC_ClearFlag(RTC_FLAG_ALRAF);
-
-    /* Clear the EXTI Line 17 Pending bit (Connected internally to RTC Alarm) */
-    //EXTI_ClearITPendingBit(EXTI_Line17);
-
-    /* Display the RTC Time and Alarm */
-    //RTC_TimeShow();
-    //RTC_AlarmShow();
-  }
-}
-
-
-// ----------------------------------------------------------------------------
-//
-// ----------------------------------------------------------------------------
-static void RTC_Config(void)
-{
-  /* Enable the PWR clock */
-  RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
-
-  /* Allow access to RTC */
-  PWR_BackupAccessCmd(ENABLE);
-
-#if defined (RTC_CLOCK_SOURCE_LSI)  /* LSI used as RTC source clock*/
-/* The RTC Clock may varies due to LSI frequency dispersion. */
-  /* Enable the LSI OSC */
-  RCC_LSICmd(ENABLE);
-
-  /* Wait till LSI is ready */
-  while(RCC_GetFlagStatus(RCC_FLAG_LSIRDY) == RESET)
-  {
-  }
-
-  /* Select the RTC Clock Source */
-  RCC_RTCCLKConfig(RCC_RTCCLKSource_LSI);
-
-  SynchPrediv = 0x18F;
-  AsynchPrediv = 0x63;
-
-#elif defined (RTC_CLOCK_SOURCE_LSE) /* LSE used as RTC source clock */
-  /* Enable the LSE OSC */
-  RCC_LSEConfig(RCC_LSE_ON);
-
-  /* Wait till LSE is ready */
-  while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
-  {
-  }
-
-  /* Select the RTC Clock Source */
-  RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
-
-  SynchPrediv = 0xFF;
-  AsynchPrediv = 0x7F;
-
-#else
-  #error Please select the RTC Clock source inside the main.c file
-#endif /* RTC_CLOCK_SOURCE_LSI */
-
-  /* Enable the RTC Clock */
-  RCC_RTCCLKCmd(ENABLE);
-
-  /* Wait for RTC APB registers synchronisation */
-  RTC_WaitForSynchro();
-}
-
-
-// ----------------------------------------------------------------------------
-//
-// ----------------------------------------------------------------------------
-static void RTC_TimeRegulate ( void )
-{
-   RTC_TimeTypeDef RTC_TimeStructure;
-
-   RTC_TimeStructure.RTC_Hours   = 14;
-   RTC_TimeStructure.RTC_Minutes = 01;
-   RTC_TimeStructure.RTC_Seconds = 00;
-
-   RTC_SetTime(RTC_Format_BIN, &RTC_TimeStructure);
-   /* Indicator for the RTC configuration */
-   RTC_WriteBackupRegister(RTC_BKP_DR0, BKP_VALUE);
-}