diff options
Diffstat (limited to 'third_party/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm8l.h')
| -rw-r--r-- | third_party/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm8l.h | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/third_party/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm8l.h b/third_party/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm8l.h new file mode 100644 index 0000000..ecfb3a8 --- /dev/null +++ b/third_party/TouchSense/STMTouch_Driver/inc/tsl_check_config_stm8l.h @@ -0,0 +1,211 @@ +/** + ****************************************************************************** + * @file tsl_check_config_stm8l.h + * @author MCD Application Team + * @version V1.4.4 + * @date 31-March-2014 + * @brief This file contains the check of all parameters defined in the + * STM8L configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __TSL_CHECK_CONFIG_STM8L_H +#define __TSL_CHECK_CONFIG_STM8L_H + +//------------------------------------------------------------------------------ + +#if ((TSLPRM_TOTAL_CHANNELS < 1) || (TSLPRM_TOTAL_CHANNELS > 24)) +#error "TSLPRM_TOTAL_CHANNELS is out of range (1 .. 24)." +#endif + +#if ((TSLPRM_TOTAL_BANKS < 1) || (TSLPRM_TOTAL_BANKS > 8)) +#error "TSLPRM_TOTAL_BANKS is out of range (1 .. 8)." +#endif + +#if ((TSLPRM_TOTAL_TOUCHKEYS < 0) || (TSLPRM_TOTAL_TOUCHKEYS > 24)) +#error "TSLPRM_TOTAL_TOUCHKEYS is out of range (0 .. 24)." +#endif + +#if ((TSLPRM_TOTAL_TOUCHKEYS_B < 0) || (TSLPRM_TOTAL_TOUCHKEYS_B > 24)) +#error "TSLPRM_TOTAL_TOUCHKEYS_B is out of range (0 .. 24)." +#endif + +#if ((TSLPRM_TOTAL_LINROTS < 0) || (TSLPRM_TOTAL_LINROTS > 24)) +#error "TSLPRM_TOTAL_LINROTS is out of range (0 .. 24)." +#endif + +#if ((TSLPRM_TOTAL_LINROTS_B < 0) || (TSLPRM_TOTAL_LINROTS_B > 24)) +#error "TSLPRM_TOTAL_LINROTS_B is out of range (0 .. 24)." +#endif + +#if ((TSLPRM_TOTAL_OBJECTS < 1) || (TSLPRM_TOTAL_OBJECTS > 24)) +#error "TSLPRM_TOTAL_OBJECTS is out of range (1 .. 24)." +#endif + +#if ((TSLPRM_TOTAL_TKEYS + TSLPRM_TOTAL_LNRTS) > 24) +#error "The Sum of TouchKeys and Linear/Rotary sensors exceeds 24." +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_USE_SHIELD +#error "TSLPRM_USE_SHIELD is not defined." +#endif + +#if ((TSLPRM_USE_SHIELD < 0) || (TSLPRM_USE_SHIELD > 1)) +#error "TSLPRM_USE_SHIELD is out of range (0 .. 1)." +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_IODEF +#error "TSLPRM_IODEF is not defined." +#endif + +#if ((TSLPRM_IODEF < 0) || (TSLPRM_IODEF > 1)) +#error "TSLPRM_IODEF is out of range (0 .. 1)." +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_DELAY_DISCHARGE_ALL +#error "TSLPRM_DELAY_DISCHARGE_ALL is not defined." +#endif + +#if ((TSLPRM_DELAY_DISCHARGE_ALL < 0) || (TSLPRM_DELAY_DISCHARGE_ALL > 65535)) +#error "TSLPRM_DELAY_DISCHARGE_ALL is out of range (0 .. 65535)." +#endif + +//------------------------------------------------------------------------------ + +#ifdef TSLPRM_STM8L1XX_SW_ACQ // Software acquisition + +#ifndef TSLPRM_PROTECT_IO_ACCESS +#error "TSLPRM_PROTECT_IO_ACCESS is not defined." +#endif + +#if ((TSLPRM_PROTECT_IO_ACCESS < 0) || (TSLPRM_PROTECT_IO_ACCESS > 1)) +#error "TSLPRM_PROTECT_IO_ACCESS is out of range (0 .. 1)." +#endif + +#endif + +//------------------------------------------------------------------------------ + +#ifdef TSLPRM_STM8L1XX_SW_ACQ // Software acquisition + +#ifndef TSLPRM_DELAY_CHARGE +#error "TSLPRM_DELAY_CHARGE is not defined." +#endif + +#if ((TSLPRM_DELAY_CHARGE < 0) || (TSLPRM_DELAY_CHARGE > 32)) +#error "TSLPRM_DELAY_CHARGE is out of range (0 .. 32)." +#endif + +#endif + +//------------------------------------------------------------------------------ + +#ifdef TSLPRM_STM8L1XX_SW_ACQ // Software acquisition + +#ifndef TSLPRM_DELAY_TRANSFER +#error "TSLPRM_DELAY_TRANSFER is not defined." +#endif + +#if ((TSLPRM_DELAY_TRANSFER < 0) || (TSLPRM_DELAY_TRANSFER > 32)) +#error "TSLPRM_DELAY_TRANSFER is out of range (0 .. 32)." +#endif + +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_USE_SPREAD_SPECTRUM +#error "TSLPRM_USE_SPREAD_SPECTRUM is not defined." +#endif + +#if ((TSLPRM_USE_SPREAD_SPECTRUM < 0) || (TSLPRM_USE_SPREAD_SPECTRUM > 1)) +#error "TSLPRM_USE_SPREAD_SPECTRUM is out of range (0 .. 1)." +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_SPREAD_MIN +#error "TSLPRM_SPREAD_MIN is not defined." +#endif + +#if (TSLPRM_USE_SPREAD_SPECTRUM == 1) +#if ((TSLPRM_SPREAD_MIN < 1) || (TSLPRM_SPREAD_MIN >= TSLPRM_SPREAD_MAX)) +#error "TSLPRM_SPREAD_MIN is out of range (1 .. TSLPRM_SPREAD_MAX-1)." +#endif +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_SPREAD_MAX +#error "TSLPRM_SPREAD_MAX is not defined." +#endif + +#if (TSLPRM_USE_SPREAD_SPECTRUM == 1) +#if ((TSLPRM_SPREAD_MAX > 255) || (TSLPRM_SPREAD_MAX <= TSLPRM_SPREAD_MIN)) +#error "TSLPRM_SPREAD_MAX is out of range (TSLPRM_SPREAD_MIN+1 .. 255)." +#endif +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_STM8L1XX_SW_ACQ // Hardware acquisition + +#ifndef TSLPRM_CT_PERIOD +#error "TSLPRM_CT_PERIOD is not defined." +#endif + +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_STM8L1XX_SW_ACQ // Hardware acquisition + +#ifndef TSLPRM_TIMER_FREQ +#error "TSLPRM_TIMER_FREQ is not defined." +#endif + +#endif + +//------------------------------------------------------------------------------ + +#ifndef TSLPRM_STM8L1XX_SW_ACQ // Hardware acquisition + +#define TMP_RELOAD ((TSLPRM_CT_PERIOD * TSLPRM_TIMER_FREQ) / 2) + +#if ((TMP_RELOAD < 4) || (TMP_RELOAD > 65534)) +#error "The calculated Timer RELOAD value is out of range (4 .. 65534)." +#endif + +#if ((TMP_RELOAD % 2) != (0)) +#error "The calculated Timer RELOAD value is odd and must be even." +#endif + +#endif + +#endif /* __TSL_CHECK_CONFIG_STM8L_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |