Split app code and third party libraries

1 files changed, 0 insertions, 245 deletions

diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h
deleted file mode 100644
index da8b152..0000000
--- a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_comp.h
-  * @author  MCD Application Team
-  * @version V1.3.0
-  * @date    16-January-2014
-  * @brief   This file contains all the functions prototypes for the COMP firmware 
-  *          library, applicable only for STM32F051 and STM32F072 devices.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
-  *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0XX_COMP_H
-#define __STM32F0XX_COMP_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx.h"
-
-/** @addtogroup STM32F0xx_StdPeriph_Driver
-  * @{
-  */
-
-/** @addtogroup COMP
-  * @{
-  */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** 
-  * @brief  COMP Init structure definition  
-  */
-  
-typedef struct
-{
-
-  uint32_t COMP_InvertingInput;     /*!< Selects the inverting input of the comparator.
-                                          This parameter can be a value of @ref COMP_InvertingInput */
-
-  uint32_t COMP_Output;             /*!< Selects the output redirection of the comparator.
-                                          This parameter can be a value of @ref COMP_Output */
-
-  uint32_t COMP_OutputPol;           /*!< Selects the output polarity of the comparator.
-                                          This parameter can be a value of @ref COMP_OutputPolarity */
-
-  uint32_t COMP_Hysteresis;         /*!< Selects the hysteresis voltage of the comparator.
-                                          This parameter can be a value of @ref COMP_Hysteresis */
-
-  uint32_t COMP_Mode;               /*!< Selects the operating mode of the comparator
-                                         and allows to adjust the speed/consumption.
-                                          This parameter can be a value of @ref COMP_Mode */
-
-}COMP_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-   
-/** @defgroup COMP_Exported_Constants
-  * @{
-  */ 
-
-/** @defgroup COMP_Selection
-  * @{
-  */
-
-#define COMP_Selection_COMP1                    ((uint32_t)0x00000000) /*!< COMP1 Selection */
-#define COMP_Selection_COMP2                    ((uint32_t)0x00000010) /*!< COMP2 Selection */
-
-#define IS_COMP_ALL_PERIPH(PERIPH) (((PERIPH) == COMP_Selection_COMP1) || \
-                                    ((PERIPH) == COMP_Selection_COMP2))
- 
-/**
-  * @}
-  */ 
-
-/** @defgroup COMP_InvertingInput
-  * @{
-  */
-
-#define COMP_InvertingInput_1_4VREFINT          ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
-#define COMP_InvertingInput_1_2VREFINT          COMP_CSR_COMP1INSEL_0  /*!< 1/2 VREFINT connected to comparator inverting input */
-#define COMP_InvertingInput_3_4VREFINT          COMP_CSR_COMP1INSEL_1  /*!< 3/4 VREFINT connected to comparator inverting input */
-#define COMP_InvertingInput_VREFINT             ((uint32_t)0x00000030) /*!< VREFINT connected to comparator inverting input */
-#define COMP_InvertingInput_DAC1                COMP_CSR_COMP1INSEL_2  /*!< DAC1_OUT (PA4) connected to comparator inverting input */
-#define COMP_InvertingInput_DAC2                ((uint32_t)0x00000050) /*!< DAC2_OUT (PA5) connected to comparator inverting input, applicable only for STM32F072 devices */
-#define COMP_InvertingInput_IO                  ((uint32_t)0x00000060) /*!< I/O (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */
-
-#define IS_COMP_INVERTING_INPUT(INPUT) (((INPUT) == COMP_InvertingInput_1_4VREFINT) || \
-                                        ((INPUT) == COMP_InvertingInput_1_2VREFINT) || \
-                                        ((INPUT) == COMP_InvertingInput_3_4VREFINT) || \
-                                        ((INPUT) == COMP_InvertingInput_VREFINT)    || \
-                                        ((INPUT) == COMP_InvertingInput_DAC1)       || \
-                                        ((INPUT) == COMP_InvertingInput_DAC2)       || \
-                                        ((INPUT) == COMP_InvertingInput_1_4VREFINT) || \
-                                        ((INPUT) == COMP_InvertingInput_IO))
-/**
-  * @}
-  */ 
-  
-/** @defgroup COMP_Output
-  * @{
-  */
-
-#define COMP_Output_None                  ((uint32_t)0x00000000)   /*!< COMP output isn't connected to other peripherals */
-#define COMP_Output_TIM1BKIN              COMP_CSR_COMP1OUTSEL_0   /*!< COMP output connected to TIM1 Break Input (BKIN) */
-#define COMP_Output_TIM1IC1               COMP_CSR_COMP1OUTSEL_1   /*!< COMP output connected to TIM1 Input Capture 1 */
-#define COMP_Output_TIM1OCREFCLR          ((uint32_t)0x00000300)   /*!< COMP output connected to TIM1 OCREF Clear */
-#define COMP_Output_TIM2IC4               COMP_CSR_COMP1OUTSEL_2   /*!< COMP output connected to TIM2 Input Capture 4 */
-#define COMP_Output_TIM2OCREFCLR          ((uint32_t)0x00000500)   /*!< COMP output connected to TIM2 OCREF Clear */
-#define COMP_Output_TIM3IC1               ((uint32_t)0x00000600)   /*!< COMP output connected to TIM3 Input Capture 1 */
-#define COMP_Output_TIM3OCREFCLR          COMP_CSR_COMP1OUTSEL     /*!< COMP output connected to TIM3 OCREF Clear */
-
-
-#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_Output_None)         || \
-                                ((OUTPUT) == COMP_Output_TIM1BKIN)     || \
-                                ((OUTPUT) == COMP_Output_TIM1IC1)      || \
-                                ((OUTPUT) == COMP_Output_TIM1OCREFCLR) || \
-                                ((OUTPUT) == COMP_Output_TIM2IC4)      || \
-                                ((OUTPUT) == COMP_Output_TIM2OCREFCLR) || \
-                                ((OUTPUT) == COMP_Output_TIM3IC1)      || \
-                                ((OUTPUT) == COMP_Output_TIM3OCREFCLR))
-/**
-  * @}
-  */ 
-
-/** @defgroup COMP_OutputPolarity
-  * @{
-  */
-#define COMP_OutputPol_NonInverted          ((uint32_t)0x00000000)  /*!< COMP output on GPIO isn't inverted */
-#define COMP_OutputPol_Inverted             COMP_CSR_COMP1POL       /*!< COMP output on GPIO is inverted */
-
-#define IS_COMP_OUTPUT_POL(POL) (((POL) == COMP_OutputPol_NonInverted)  || \
-                                 ((POL) == COMP_OutputPol_Inverted))
-
-/**
-  * @}
-  */ 
-
-/** @defgroup COMP_Hysteresis
-  * @{
-  */
-/* Please refer to the electrical characteristics in the device datasheet for
-   the hysteresis level */
-#define COMP_Hysteresis_No                         0x00000000           /*!< No hysteresis */
-#define COMP_Hysteresis_Low                        COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */
-#define COMP_Hysteresis_Medium                     COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */
-#define COMP_Hysteresis_High                       COMP_CSR_COMP1HYST   /*!< Hysteresis level high */
-
-#define IS_COMP_HYSTERESIS(HYSTERESIS)    (((HYSTERESIS) == COMP_Hysteresis_No) || \
-                                           ((HYSTERESIS) == COMP_Hysteresis_Low) || \
-                                           ((HYSTERESIS) == COMP_Hysteresis_Medium) || \
-                                           ((HYSTERESIS) == COMP_Hysteresis_High))
-/**
-  * @}
-  */
-
-/** @defgroup COMP_Mode
-  * @{
-  */
-/* Please refer to the electrical characteristics in the device datasheet for
-   the power consumption values */
-#define COMP_Mode_HighSpeed                     0x00000000            /*!< High Speed */
-#define COMP_Mode_MediumSpeed                   COMP_CSR_COMP1MODE_0  /*!< Medium Speed */
-#define COMP_Mode_LowPower                      COMP_CSR_COMP1MODE_1 /*!< Low power mode */
-#define COMP_Mode_UltraLowPower                 COMP_CSR_COMP1MODE   /*!< Ultra-low power mode */
-
-#define IS_COMP_MODE(MODE)    (((MODE) == COMP_Mode_UltraLowPower) || \
-                               ((MODE) == COMP_Mode_LowPower)      || \
-                               ((MODE) == COMP_Mode_MediumSpeed)   || \
-                               ((MODE) == COMP_Mode_HighSpeed))
-/**
-  * @}
-  */
-
-/** @defgroup COMP_OutputLevel
-  * @{
-  */ 
-/* When output polarity is not inverted, comparator output is high when
-   the non-inverting input is at a higher voltage than the inverting input */
-#define COMP_OutputLevel_High                   COMP_CSR_COMP1OUT
-/* When output polarity is not inverted, comparator output is low when
-   the non-inverting input is at a lower voltage than the inverting input*/
-#define COMP_OutputLevel_Low                    ((uint32_t)0x00000000)
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-/*  Function used to set the COMP configuration to the default reset state ****/
-void COMP_DeInit(void);
-
-/* Initialization and Configuration functions *********************************/
-void COMP_Init(uint32_t COMP_Selection, COMP_InitTypeDef* COMP_InitStruct);
-void COMP_StructInit(COMP_InitTypeDef* COMP_InitStruct);
-void COMP_Cmd(uint32_t COMP_Selection, FunctionalState NewState);
-void COMP_SwitchCmd(FunctionalState NewState);
-uint32_t COMP_GetOutputLevel(uint32_t COMP_Selection);
-
-/* Window mode control function ***********************************************/
-void COMP_WindowCmd(FunctionalState NewState);
-
-/* COMP configuration locking function ****************************************/
-void COMP_LockConfig(uint32_t COMP_Selection);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__STM32F0XX_COMP_H */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/