diff options
Diffstat (limited to 'Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h')
| -rw-r--r-- | Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h | 245 |
1 files changed, 0 insertions, 245 deletions
diff --git a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h b/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h deleted file mode 100644 index da8b152..0000000 --- a/Libraries/STM32F0xx_StdPeriph_Driver/inc/stm32f0xx_comp.h +++ /dev/null @@ -1,245 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_comp.h - * @author MCD Application Team - * @version V1.3.0 - * @date 16-January-2014 - * @brief This file contains all the functions prototypes for the COMP firmware - * library, applicable only for STM32F051 and STM32F072 devices. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> - * - * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0XX_COMP_H -#define __STM32F0XX_COMP_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx.h" - -/** @addtogroup STM32F0xx_StdPeriph_Driver - * @{ - */ - -/** @addtogroup COMP - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief COMP Init structure definition - */ - -typedef struct -{ - - uint32_t COMP_InvertingInput; /*!< Selects the inverting input of the comparator. - This parameter can be a value of @ref COMP_InvertingInput */ - - uint32_t COMP_Output; /*!< Selects the output redirection of the comparator. - This parameter can be a value of @ref COMP_Output */ - - uint32_t COMP_OutputPol; /*!< Selects the output polarity of the comparator. - This parameter can be a value of @ref COMP_OutputPolarity */ - - uint32_t COMP_Hysteresis; /*!< Selects the hysteresis voltage of the comparator. - This parameter can be a value of @ref COMP_Hysteresis */ - - uint32_t COMP_Mode; /*!< Selects the operating mode of the comparator - and allows to adjust the speed/consumption. - This parameter can be a value of @ref COMP_Mode */ - -}COMP_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup COMP_Exported_Constants - * @{ - */ - -/** @defgroup COMP_Selection - * @{ - */ - -#define COMP_Selection_COMP1 ((uint32_t)0x00000000) /*!< COMP1 Selection */ -#define COMP_Selection_COMP2 ((uint32_t)0x00000010) /*!< COMP2 Selection */ - -#define IS_COMP_ALL_PERIPH(PERIPH) (((PERIPH) == COMP_Selection_COMP1) || \ - ((PERIPH) == COMP_Selection_COMP2)) - -/** - * @} - */ - -/** @defgroup COMP_InvertingInput - * @{ - */ - -#define COMP_InvertingInput_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ -#define COMP_InvertingInput_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ -#define COMP_InvertingInput_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ -#define COMP_InvertingInput_VREFINT ((uint32_t)0x00000030) /*!< VREFINT connected to comparator inverting input */ -#define COMP_InvertingInput_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC1_OUT (PA4) connected to comparator inverting input */ -#define COMP_InvertingInput_DAC2 ((uint32_t)0x00000050) /*!< DAC2_OUT (PA5) connected to comparator inverting input, applicable only for STM32F072 devices */ -#define COMP_InvertingInput_IO ((uint32_t)0x00000060) /*!< I/O (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */ - -#define IS_COMP_INVERTING_INPUT(INPUT) (((INPUT) == COMP_InvertingInput_1_4VREFINT) || \ - ((INPUT) == COMP_InvertingInput_1_2VREFINT) || \ - ((INPUT) == COMP_InvertingInput_3_4VREFINT) || \ - ((INPUT) == COMP_InvertingInput_VREFINT) || \ - ((INPUT) == COMP_InvertingInput_DAC1) || \ - ((INPUT) == COMP_InvertingInput_DAC2) || \ - ((INPUT) == COMP_InvertingInput_1_4VREFINT) || \ - ((INPUT) == COMP_InvertingInput_IO)) -/** - * @} - */ - -/** @defgroup COMP_Output - * @{ - */ - -#define COMP_Output_None ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */ -#define COMP_Output_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ -#define COMP_Output_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */ -#define COMP_Output_TIM1OCREFCLR ((uint32_t)0x00000300) /*!< COMP output connected to TIM1 OCREF Clear */ -#define COMP_Output_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */ -#define COMP_Output_TIM2OCREFCLR ((uint32_t)0x00000500) /*!< COMP output connected to TIM2 OCREF Clear */ -#define COMP_Output_TIM3IC1 ((uint32_t)0x00000600) /*!< COMP output connected to TIM3 Input Capture 1 */ -#define COMP_Output_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */ - - -#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_Output_None) || \ - ((OUTPUT) == COMP_Output_TIM1BKIN) || \ - ((OUTPUT) == COMP_Output_TIM1IC1) || \ - ((OUTPUT) == COMP_Output_TIM1OCREFCLR) || \ - ((OUTPUT) == COMP_Output_TIM2IC4) || \ - ((OUTPUT) == COMP_Output_TIM2OCREFCLR) || \ - ((OUTPUT) == COMP_Output_TIM3IC1) || \ - ((OUTPUT) == COMP_Output_TIM3OCREFCLR)) -/** - * @} - */ - -/** @defgroup COMP_OutputPolarity - * @{ - */ -#define COMP_OutputPol_NonInverted ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */ -#define COMP_OutputPol_Inverted COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */ - -#define IS_COMP_OUTPUT_POL(POL) (((POL) == COMP_OutputPol_NonInverted) || \ - ((POL) == COMP_OutputPol_Inverted)) - -/** - * @} - */ - -/** @defgroup COMP_Hysteresis - * @{ - */ -/* Please refer to the electrical characteristics in the device datasheet for - the hysteresis level */ -#define COMP_Hysteresis_No 0x00000000 /*!< No hysteresis */ -#define COMP_Hysteresis_Low COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */ -#define COMP_Hysteresis_Medium COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */ -#define COMP_Hysteresis_High COMP_CSR_COMP1HYST /*!< Hysteresis level high */ - -#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_Hysteresis_No) || \ - ((HYSTERESIS) == COMP_Hysteresis_Low) || \ - ((HYSTERESIS) == COMP_Hysteresis_Medium) || \ - ((HYSTERESIS) == COMP_Hysteresis_High)) -/** - * @} - */ - -/** @defgroup COMP_Mode - * @{ - */ -/* Please refer to the electrical characteristics in the device datasheet for - the power consumption values */ -#define COMP_Mode_HighSpeed 0x00000000 /*!< High Speed */ -#define COMP_Mode_MediumSpeed COMP_CSR_COMP1MODE_0 /*!< Medium Speed */ -#define COMP_Mode_LowPower COMP_CSR_COMP1MODE_1 /*!< Low power mode */ -#define COMP_Mode_UltraLowPower COMP_CSR_COMP1MODE /*!< Ultra-low power mode */ - -#define IS_COMP_MODE(MODE) (((MODE) == COMP_Mode_UltraLowPower) || \ - ((MODE) == COMP_Mode_LowPower) || \ - ((MODE) == COMP_Mode_MediumSpeed) || \ - ((MODE) == COMP_Mode_HighSpeed)) -/** - * @} - */ - -/** @defgroup COMP_OutputLevel - * @{ - */ -/* When output polarity is not inverted, comparator output is high when - the non-inverting input is at a higher voltage than the inverting input */ -#define COMP_OutputLevel_High COMP_CSR_COMP1OUT -/* When output polarity is not inverted, comparator output is low when - the non-inverting input is at a lower voltage than the inverting input*/ -#define COMP_OutputLevel_Low ((uint32_t)0x00000000) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -/* Function used to set the COMP configuration to the default reset state ****/ -void COMP_DeInit(void); - -/* Initialization and Configuration functions *********************************/ -void COMP_Init(uint32_t COMP_Selection, COMP_InitTypeDef* COMP_InitStruct); -void COMP_StructInit(COMP_InitTypeDef* COMP_InitStruct); -void COMP_Cmd(uint32_t COMP_Selection, FunctionalState NewState); -void COMP_SwitchCmd(FunctionalState NewState); -uint32_t COMP_GetOutputLevel(uint32_t COMP_Selection); - -/* Window mode control function ***********************************************/ -void COMP_WindowCmd(FunctionalState NewState); - -/* COMP configuration locking function ****************************************/ -void COMP_LockConfig(uint32_t COMP_Selection); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F0XX_COMP_H */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |